Navaio NAV-H16S Quick Start Manual - 7. Recording Setup
4/8/16-CH DVR Quick Start Guide
7
main menu. Then click Setup to enter into Setup interface as shown below.
Basic configuration: Users can set video system, menu language, audio,
time and authorization check.
Live configuration:Users can set name/time display, picture color and hide
cameras.
Record configuration:Users can set record quality, frame rate, resolution,
time stamp and recycle.
Schedule configuration: Users can set schedule for timer, motion detection,
and sensor alarm respectively.
Alarm configuration: Users can set sensor type, alarm trigger and buzzer
alarm.
Network configuration: Users enable network function, and configure IP
address, DDNS, transmission video parameters here.
User configuration: Administrator can add, delete users, and change their
authorization
PTZ configuration: Users can set protocol, baud rate, address, presets and
auto cruise track here.
Advanced configuration: Users can reboot the device and import & export
data into or from mobile storage medium.
7. Recording Setup
A user needs to install and format a HDD, and set all the recording parameters
before recording. There are four kinds of record modes.
7.1 Manual Recording
A user can press REC button on the front panel after quitting system setup.
http://www.e-camere.ro/dvr/Navaio/NAV-H16S