Navien COMFORT MATE EQH-20WUS Installation Instructions Manual - Setting Sleep Mode
Setting Sleep Mode
21
Continue to touch [ MODE ] button until ramp is turned on
to activate Sleep Mode
Controlling at Boiler
ýExample of Temperature Change in Sleep Mode
ex) initial temperature at 36’C and sleeping duration of 8 hours
÷Sleeping temperature for Navien Mate can be set up to 99°F (37°C), the optimum sleeping temperature.
While the initial temperature can be set at 99°F (37°C), in that case the temperature remains at 37°C in the first
phase(for the first hour.)
1. When setting dual heating
ةWhen both L and R appears on the status window, press the dial,
set initial sleeping temperature and press the dial again.
(Temperature can be set between 86°F (30°C) to 99°F (37°C)
تRotate the dial to choose sleeping duration and press the dial.
2. When setting individual heating for right and left side
ة
When both L and R appears on the status window, rotate the
dial toward left to choose left side heating and press dial to
confirm once L sign is indicated.
ت
When temperature to the left side flickers, rotate the dial to
set sleeping duration and press the dial. (initial sleeping
temperature can be set between 86°F (30°C) to 99°F (37°C)
and setting OFF
activates general mode instead of Sleep Mode)
ث
When temperature to the left side flickers, rotate the dial to
set sleeping duration and press the dial. (Sleeping duration
can be set between 5 hours to 10 hours, and setting OFF
activates general mode instead of Sleep Mode)
ج
Once settings for left side is complete, it automatically moves
to settings for right side.
ح
Set the same initial sleeping temperature and sleeping duration
for both sides.
L
R
)LUVW3KDVH
LQLWLDOWHPSHUDWXUH
ë&
H[ë&DERXWKRXU
LQLWLDO
7HPSHUDWXUH
ë&
6HFRQG3KDVH
LQLWLDOWHPSHUDWXUH
ë&
H[ë&DERXWDQGDKDOIKRXU
7KLUG3KDVH
LQLWLDOWHPSHUDWXUH
ë&
H[ë&DERXWDQGDKDOIKRXU
When Sleep Mode is used, you cannot use the Remote Controller to adjust the set temperature and the boiler will
operate in DUAL MODE. Once the Sleep Mode is deactivated, the unit will reset back to the previous set temperature.