Navig8r NAVCAM-FHD360 User Manual - What’S In The Box
NAVCAM-FHD360
USER MANUAL
6
NavCam-FHD360 Manual Ver 2.2 12/2014
WHAT’S IN THE BOX
Navig8r Crash Cam FHD360 (Monitor with Built in Cameras), 1 x Rear Camera (Dual Camera)
2 x Windscreen Suction-cup Mount (1 x Front Camera/Monitor, 1 x Rear Camera), 1 x Car
Charger, 1 x User Manual
FEATURES AND OPERATION
Memory Card required for operation
The CRASHCAM-FHD360 requires a Micro SD card (not included) to record video/image
content. (See page 11 for a table showing SD card capacity and the relevant amount of
video/image content able to be stored). For optimal performance, we recommend using a
Class 6 or 10 Micro SD card to ensure fast data transfer rates (Class 4 cards will still work
however may result in slower transfer rates).
Power on/off function (auto on/off)
To turn on/off the CRASHCAM-FHD360, press and hold the power button on the top right of
the device. When connected to the car charger (cigarette socket) of your car, the
CRASHCAM-FHD360 will turn on and off automatically when the car’s ignition is turned on
or off. If the CRASHCAM-FHD360 does not turn off immediately it means the device is
completing the file save process before turning off (usually only a few seconds).
Note: If the car charger car charger socket is “constant on” (in some European vehicles), then
the CRASHCAM-FHD360 will need to be turned on/off manually by the power button or by
removing the car charger plug.
Whilst connected to the car charger DC socket (or from a powered USB hub or PC USB port)
the LED indicator will glow RED (battery is charging) and will turn off once the battery is fully
charged. (note – the device’s battery will not charge if connected to a PC USB port)
Installation on the car windscreen
The CRASHCAM-FHD360 works best when mounted centrally and high up on the windscreen
(typically behind or close to the rear vision mirror for the front camera and towards the
centre of the rear window). Use the supplied windscreen suction mount to affix the
CRASHCAM-FHD360 to the windscreen and then adjust the mount until you can see a clear
view of the road ahead on the Monitor.
Recording
Turn on the CRASHCAM-FHD360 and press the REC button (unless auto REC on has been set
with ignition on). When recording commences, the LED indicator will flash BLUE and there
will be a flashing RED dot on screen. (A timer will also start “ticking over” on screen). The
recorded file is then saved onto the Micro SD Card. You can manually stop recording by
pressing the REC or turning the car ignition off (stopping power to the device).