Navig8r NAVCAM-GPS User Manual - Default File Format
USER MANUAL
NAVCAM-GPS
12
2.
Language: Select preferred language
3.
Screen off: Select between 5, 15, 30 seconds and to switch this feature off
4.
Auto power off: Select between 3, 9 minutes, 4 hours or to switch this feature off
5.
Format: Display memory information, or use the middle button to format the Micro
SD card. Then confirm your choice and begin the format.
6.
About system: Display firmware revision and product ID, or use the middle button to
reset the device back to factory settings. Confirm your choice to begin the reset.
7.
Time zone: Select your current time zone (Note: Reference table below)
8.
Rotate screen: Rotate the preview window 180 degrees (only)
9.
Motion detection: Activate or deactivate this feature
10.
Sound switch: Activate or deactivate microphone
11.
GPS view: Display current longitude and latitude co-ordinates
12.
Flash light: Activate or deactivate this feature
Note 1: The Crashcam-GPS will start video recording automatically when it is power on
(pending the user settings)
Note 2: When the Crashcam-GPS has successfully connected to GPS satellites, the satellite
icon on the main menu screen will turn red.
Time Zone reference table