Navigon 20 easy User Manual - 8.4 Tracks

User's manual NAVIGON 20 EASY | 20 PLUS 

- 68 - 

Useful functions 

8.3.1 Enabling 

screenshots 

1. In 

the 

N

AVIGATION

 window tap on Options > Settings > General > 

Enable Screenshots. 

2.  Select whether you want to enable screenshots (Yes) or not (No). 

The 

 (Screenshots) button appears at the bottom right edge of 

the screen. 

8.3.2 

Creating a screenshot 

► 

Tap on the 

 (Screenshots) button. 

The screen is saved as a graphic. The 

 (Screenshots) button is 

not shown in the figure. 

The screenshots are saved in the \ScreenShots folder. This folder can 

be found either in the internal memory of the navigation device, on the 

inserted memory card or in both memories. 

8.4 Tracks 

You can record any section of a route you take, even if it lies off the 

digitalised road system. 

You can record for example a bicycle tour and follow the same route 

again some time later. 

Tracks are saved in KML data format. KML is a widely used data 

format. You can also play back your tracks for example in Google Earth 

on your PC. 

Recording a track 

You can record a track when the map is open in Navigation mode or in 

Standard mode. 

1. Tap 

on 

Options > Services > Start Recording. 

The S

TART 

R

ECORDING

 window opens. 

2.  Enter a name for the planned recording. 

Note: Only Latin characters are available for naming tracks. 

3.  Tap on Start Recording. 

Starting from your current position, the navigation device will record 

the entire route you now take. 

The 

 (Record Track) symbol appears at the top right edge of the 

screen throughout the recording. 

The recorded route is saved in the S

AVED 

R

OUTES AND 

T

RACKS

 list 

in KML data format. It can be loaded again from there at any time.