Navigon 2100 User Manual - 2.3
User's manual
NAVIGON 2100 | 2110
Before you begin
- 11 -
5
Slot for SD-memory card
6
On/Off/Standby
7
Connection for external GPS antenna
2.3
Preparing NAVIGON 2100 | 2110 for use
2.3.1
Before using for the first time
Charging the rechargeable battery
Included in delivery of the NAVIGON 2100 | 2110 is a car charger cable
with which power can be supplied to the navigation device via the
vehicle's cigarette lighter.
The car charger cable is connected to the NAVIGON 2100 | 2110 via
the mini-USB-socket
on the bottom of the device.
Caution! The car charger cable is to be connected to cigarette lighters
with an operating voltage of 12V only.
►
Connect the car charger cable to the navigation device and the
vehicle's cigarette lighter.
The LED of the NAVIGON 2100 | 2110 lights orange during charging.
The LED lights green when the NAVIGON 2100 | 2110 is fully charged.
Note: It takes approx. 2-3 hours to charge the device when the battery
is flat.
A fully charged battery enables approx. 3 hours of use.
Inserting a memory card
►
Insert the memory card provided into the device (see image). Press
the card into the device until it locks into place.