Navigon 3300 max User Manual - page 15

User’s manual NAVIGON 33xx | 43xx max 

Switching on the NAVIGON 33xx | 43xx max 

- 15 - 

Switching the navigation device to standby mode 

► 

Press briefly (max. 1.5 seconds) on the 

 (On/Off) key. 

- or - 

1.  Tap in the N

AVIGATION

 window of the navigation software on the 

 button. 

2.  Tap on Standby. 

Automatic Standby 

You can configure the NAVIGON 33xx | 43xx max so that the 

navigation device is automatically switched to standby mode. 

► 

In the N

AVIGATION

 window tap on Options > Settings > General > 

Automatic Standby. 

► 

Select after how much time you want the navigation device to be 

switched to standby mode (Never, After 10 mins, After 20 mins, 

After 30 mins). 

► 

Select Power Loss in order to switch the device to standby mode 

when the external power supply is interrupted. As soon as the 

device is connected again to the external power supply it will switch 

on again automatically. 

Switching off the navigation device 

► 

Press the 

 (On/Off) key and keep it pressed until the device 

switches off. (Approx. 4 seconds.)  

- or - 

1.  Tap in the N

AVIGATION

 window of the navigation software on the 

 button. 

2. Tap 

on 

Off. 

Note:

 When you switch the navigation device to standby mode, the next 

time it is switched on it will start very quickly with the window which was 

active when switched off. In standby mode the device still consumes a 

small amount of energy however. The battery may be flat after a few 

days. 

When you switch off the device, it consumes no energy. It can then take 

several months for the battery to become flat. Switching the device on 

again triggers a restart which can take some time (approx. 30 seconds). 

Your settings and your saved destinations and routes will be retained.