Navigon 3300 max User Manual - page 65
User’s manual NAVIGON 33xx | 43xx max
Handsfree Module (only NAVIGON 4350 max)
- 65 -
7.1.2
Pairing from the mobile phone
Note:
Please consult the mobile phone's manual if you are uncertain
about how to carry out the following steps on the mobile phone.
1. Make sure that the Bluetooth function is activated on both, the
mobile phone and the NAVIGON 4350 max. To perform the pairing
from the mobile phone, the functions Discoverable by Others and
Others May Connect must also be activated on the
NAVIGON 4350 max
.
2. Using your mobile phone, search for other Bluetooth devices.
The navigation device is detected as NAVIGON.
3. Initiate a connection to the detected NAVIGON device.
The mobile phone prompts you to enter a password.
4. Enter a password (1-16 digits).
The NAVIGON 4350 max prompts you to enter a password.
5. Enter the same password in the Key box as on the mobile phone
and tap on
(OK).
The pairing is performed and a connection is set up between the
two devices. The connected device is indicated in the T
RUSTED
D
EVICES
list. (Green symbol
(Connected).)
7.1.3
Connecting to a device
The word connect describes any subsequent connections between
paired Bluetooth devices. No further password entry is necessary when
connecting.
Connecting automatically
Note:
For automatic connection to be possible, the
NAVIGON 4350 max
must be saved in the Bluetooth settings on your
mobile phone as "authorised" or "authorised device" (the exact wording
can vary from manufacturer to manufacturer). For more details refer to
your mobile phone manual.
If the device you want to connect to was the last connected device and
the Reconnect Automatically setting is activated, the connection will be
set up automatically as soon as the device is within range.
Connecting manually
If a Bluetooth connection to a device is active, you must disconnect this
connection first before you can connect to a different device. The