Navigon 92 PLUS User Manual - Navigation
User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
Navigation
- 29 -
Select the tasks for which you want to use Voice Command:
►
Entering Addresses: You can enter only addresses with the
voice command function.
►
Answering: You can enter addresses and answer questions
asked by the navigation device.
►
Complete: You can use all the voice command functions.
Note:
For details of how to enter a destination using voice commands
refer to the chapter "Announcing the address" on page 34.
The volume of the voice commands assistant can be controlled
independently of the volume of the navigation instructions. This means
you can still hear the input requests when you have muted the
navigation instructions.
1. In the
N
AVIGATION
window tap on
(More) > System
Settings > Voice Command > Volume of the Assistant.
2. Select the volume for the assistant.
Note:
For details of how to configure the navigation system refer to the
chapter "Configuring the Navigation System" on page 118.
7
Navigation
Use the navigation system at your own risk.
Caution!
Be sure to refer to all the safety information in chapter
"Important safety information" on page 9.
Impaired GPS reception
If GPS reception is impaired (e.g. because you are in a tunnel),
navigation will be continued. The navigation system will then calculate
your likely position from the route data and your previous driving profile.
As soon as GPS signals are received again, navigation will be
continued with real GPS data.
Arriving at your destination
When you have reached your selected destination, a message to this
effect will be displayed.
Only your current position (orange arrow) and the destination flag will
now be shown on the map.