Navison Audio NVS - 211SE Setup And Operation Manual - page 6
Speaker Cables
The speaker cables from the output posts of the NVS-211SE to the speaker system can be any
length that your setup requires. Select speaker cables of sufficient size to preserve the outstanding
performance capabilities and sound quality of your new power amplifiers. Heavy duty #14 gauge
wire is suitable for distances up to 15 feet; #12 gauge is good for 25-30 feet. Most audio dealers
have high performance speaker cable in stock for this purpose. We strongly urge you to try
several types to find the best ones for your combination of components and speakers.
Interconnect Cables
Signal input connection is made via the RCA input jack on the rear of the amplifier located next
to the output binding posts. Set the input selection switch to indicate the desired input connection
RCA. The input interconnect cables from the output of the preamplifier can be any length your
installation requires. A shielded high quality interconnect cable is important to reduce chances
for hum or interference. Ask your Authorized Navison audio dealer for advice.
NVS-211SE Owner’s Manual
4