Navman M-Nav 900 User Manual - page 17
Working Time
The M-Nav 900/950 allows you to record when you are starting
a new task, taking a break, or finishing work. The list of tasks will
be set up by your fleet administrator. You can access the Work-
ing Time screen from the main menu.
The following information is displayed on the Working Time
screen:
l
Time since you last logged on
l
Hours worked today (this is reset at midnight)
l
Time when your next rest break is due
l
Minimum length of time that you must rest
NOTE
These screens will be displayed only if your fleet admin-
istrator has set up the Working Time functions in the
OnlineAVL2 application.
Changing Your Driver Status
1. From the main menu, select
Working Time
.
2. Select
. The Change Driver Status screen is displayed.
3. Select the status that applies to you. Your status will be
updated.
M-Nav 900/950 | User Guide
Harsh Events
The main purpose of the Harsh Events feature is to help you
improve your driving behavior by notifying you when you have
generated harsh events during a trip.
The harsh events you are notified of are:
l
Harsh Acceleration
l
Harsh Braking
l
Harsh Left Cornering
l
Harsh Right Cornering
When you reach a certain percentage of the set harsh event
threshold, you will initially receive a Warning alert. When you
have exceeded the threshold, you will receive a Violation alert,
which is then sent to your fleet administrator.
NOTE
The Harsh Events feature is enabled and set up by your fleet
administrator.
Notification
When a Warning or Violation alert is triggered, an audible tone is
played and an icon is shown on the device. Two types of harsh
event icons are used on the M-Nav 900/950. Yellow icons are
used for Warning alerts, while red icons are for Violation alerts.
14