Navman M-Nav 900 User Manual - page 28
M-Nav 900/950 | User Manual
28
7.3
Setting up EMS Options
NOTES:
This feature has to be enabled by your fleet administrator.
If enabled, these options may be set up by your fleet administrator and you may not be able to
change them.
Go to the ‘Main Menu’ and select EMS.
Select Settings. The ‘EMS Settings’ menu is displayed.
Select:
Update Period to change the rate that updates are
displayed (the default is one second).
Trip Report toggles between On/Off (the default is On).
EMS Diagnostics to show diagnostic information for all
options that have been set up. This may be used for
troubleshooting.
Dashboard Layout to change the information displayed on
the EMS Dashboard screen (this option will only show if it
has been set up by your fleet administrator).
7.4
Changing the EMS Dashboard Screen
NOTE: These options may be set up by your fleet administrator and you may not be able to change them.
Select Settings. The ‘EMS Settings’ menu is displayed.
Select Dashboard Layout. The ‘EMS Dashboard Layout’
screen is displayed.
The X Items button (right hand panel) shows the number of
items that will be displayed on the EMS Dashboard. Valid
options are four, six, or eight. Keep selecting this button to
toggle between the options.
Select SAVE to save changes.
The number of items selected will be displayed.
NOTE: If eight items have been selected, you will have to use
the up and down arrows to see the last two items.
When the number of items has been selected, you can select
inside any of the cells to display a menu of readings that can
be displayed in that cell.
Select any reading to select it. (The example shows that wheel
speed has been selected.)
NOTE: The units displayed for each option can be changed
(e.g. from km to miles). On the right hand panel, select None
(to set each unit separately), or choose from SI (Systeme
Internationale), US or UK.