Naxa NAS-3061A Instruction manual - page 3
www.naxa.com
Page 3
Bluetooth
®
Speaker
Connecting Power
Your speaker can be powered by the included recharge-
able battery. Upon initial use, the battery should be
charged fully to ensure optimal performance and bat-
tery life.
Installing the Battery:
1. Remove the cover of the battery compartment on
the speaker.
2. Place the rechargeable battery (BL-5C) in the bat-
tery compartment, taking care to match the +/–
poles of the battery with the markings in the com-
partment.
3. Replace the cover of the battery compartment.
Charging the Battery
Use the included USB cable to connect the speaker to a
USB power source to charge the battery.
• Connect the small end of the cable to the USB
charge port of the unit.
• Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
L
L
The round DC 5V power input requires an
optional power adapter and is not used.
L
⚠
The battery used in this device may pres-
ent a fire or chemical burn if mistreated.
Do not disassemble, incinerate, or heat
the battery. Do not leave the battery in a
place subject to direct sunlight, or in a car
with its windows closed.
Do not connect the unit to a power source
other than that which is indicated here or
on the label as this may result in the risk
of fire or electric shock.