Naxa NAS-3061A Instruction manual - page 9
www.naxa.com
Page 9
Symptom
Possible Cause
Possible Solution
The device is
connected but
there is no
sound.
The AUX connector
may be in use.
Disconnect all cables
from the AUX in-
put connector of the
speaker.
Your device may be
beyond the effec-
tive range of the
speaker.
Move closer to the
speaker. Range may
be affected adversely
by environmental
conditions.
Your device may
not be in playback
mode.
Ensure that your device
is operating correctly.
Start playback on your
device.
USB Battery Pack
Symptom
Possible Solution
The status
LED does not
light up while
charging the
battery pack.
Ensure that the battery pack is securely con-
nected to a power source with the included
USB charge cable.
If the power source is a computer, make sure
the computer is turned on.
Symptom
Possible Solution
The battery
pack is not
charging a
connected
device.
Ensure that the USB cable is connected se-
curely to the battery pack and to the device.
Make sure the battery pack is fully charged
before attempting to charge another device.