Naxa NAS-3076 Instruction Manual - page 7
www.naxa.com
Page 7
Using Bluetooth
®
Mode
Pairing a Device with Bluetooth®
A device must be paired with the speaker before using
them together for the first time.
Make sure Bluetooth is enabled on your device before
attempting to pair it.
When you turn on the speaker, it will automatically
search for a paired device. If it finds a paired device,
it will connect to it automatically, and you’re ready to
play music from that device.
If it does not detect a paired device, it will switch to
Pairing mode (the Status indicator [9] will flash blue
and the speaker will emit a tone). When the speaker is
in Pairing Mode, it will announce itself to nearby Blue-
tooth devices and accept pairing requests from them
1. The speaker will announce itself as “NAXA NAS-
3076.” Use your device to search for nearby Blue-
tooth devices. (This function is usually in the
Bluetooth settings menu; refer to your device’s in-
struction manual to learn more.)
2. Select “NAXA NAS-3076” from the list of found de-
vices.
3. If your device asks for a passcode, use “0000” to
complete the pairing process.
When the speaker is paired and connected to a device,
the speaker will beep and the Status indicator [9] will
light a steady blue.
⚠
L
To enter pairing mode when the speaker
is already on, turn it off and then back on
again.
Bluetooth
®
Speaker Controls
When the speaker is connected to a Bluetooth
®
device:
To do this...
...do this
Start, pause, or resume audio
playback
Press
.
Skip to the previous track
Press -.
Skip to the next track
Press +.
Adjust the volume level
Press and hold - or +.