Naxa NKM-100 Instruction Manual - page 11

www.naxa.com 

Page 11

Playing a Disc

 • To start, pause, or resume playback, press   [18]. 

 • To stop playback, press   [21]. 

Selecting a Desired Track/Passage

 • To select a desired track, press   or   [22, 20] un-

til the desired track appears on the display. 

 • To search for a particular passage during playback, 

press and hold   or   [22, 20] to quickly scan 

through the current track. Release the button to 

return to playback at normal speed.

Programming Tracks 

Programming tracks of disc are possible when play-

back is stopped. Up to 20 tracks can be programmed to 

play in any order.

1.  While playback is stopped, press PROGRAM/PAIR 

[15] to enter program mode. The Program indicator 

will light up.

2.  While the display is flashing, use the   or   but-

tons [22, 20] to select a track.

3.  Press  PROGRAM/PAIR  [15] to save the selected 

track  to  the  program.  The  display  will  flash  the 

next program track number.

4.  Repeat steps 2 & 3 to store other desired tracks 

until all desired tracks have been programmed.

5.  Press   [18] to start playing the custom program; 

press   [21] to cancel program playback.

To clear the program from memory, press   [21]  when 

the disc is stopped or open the CD door.

Repeat Play Modes

Control the order in which tracks are played by chang-

ing the repeat play mode. Press REP [19] during play-

back in order to cycle through the different modes; the 

repeat indicator will light up when a repeat mode is ac-

tive. 

To cancel repeat play mode and return to normal play-

back, press REP [19] until the repeat indicator darkens.