Naxa NKM-100 Instruction Manual - page 18
Page 18
Naxa Electronics
Troubleshooting
No power when ON
• Check the power plug is connected to the back of the unit and
then plug into a power outlet.
• Check that the outlet is switched on and working properly.
• Check that the POWER button on the front of the unit has
been pressed.
No sound
• Turn the master volume dial clockwise to raise the volume.
• If playing from an external audio device, ensure the volume is
turned up to at least 80%.
CD Player does not work
• Check that your disc is not scratched or dirty.
• Ensure that the CD lens is clean. If dusty, blow clean air across
the lens to remove the dust. If problems persist, use a CD lens
cleaner to clean the CD compartment.
• Check there is no moisture inside of the unit. Allow to dry
before use.
• Ensure the protective card has been removed from the CD Tray.
• Try a different CD
No sound when connected to a TV
• Ensure component or AV is selected as the source for your TV
audio.
• Ensure the color-coded RCA cables are correctly connected to
their respective jacks.
• Turn up the volume of the TV or home theatre.
Lyrics do not appear on screen
• Ensure the color-coded RCA cables are correctly connected to
their respective jacks.
• Ensure you are playing a CD+G. Audio CDs will not display Lyr-
ics.
• Ensure that the CD+G LED is lit to confirm a CD+G format disc
is playing
No sound from microphone
• Turn up the volume on the MIC 1 and MIC 2 VOLUME and mas-
ter volume dials.
• Ensure the microphone is switched to the ON position on the
microphone handle.
• Ensure you are singing into the microphone and are not more
than 3cm away from the microphone.
• Ensure the microphone jack is securely connected to either
MIC 1 or MIC 2.
• Check the echo dial is not set too low