Naxa NRC-180 Instruction Manual - page 12

Page 12 

Naxa Electronics

2.  Use your device to search for available Blue-

tooth devices. (This function is usually in the 

Bluetooth  settings  menu;  refer  to  your  de-

vice’s instruction manual to learn more.)

3.  The speaker will announce itself as the “NAXA 

NRC-180.” Select it from the list of devices.

4.  If your device asks for a passcode, use “0000” 

to complete the pairing process.

ѥ

L

If the speaker fails to pair with your 

device: 1) Make sure Bluetooth is 

enabled on your device; 2) Press and 

hold the MEM/  button until the 

Bluetooth LED flashes; 3) Use your 

device to search for the Naxa NRC-

180 again.

Using the Bluetooth

®

 Controls

If your device supports Bluetooth remote functions, 

you will be able to do the following it is connected to 

the system:

To do this...

...do this

Start, pause, or resume 

audio playback

Press MEM/ .

Skip to the previous track

Press 

.

Skip to the next track

Press 

.

Decrease the volume level

Press VOL–/AL1-SET.

Increase the volume level

Press VOL+/AL2-SET.

ѥ

L

Make sure the volume of your con-

nected device is set to maximum, 

then use the speaker’s controls to 

adjust the volume to a comfortable 

listening level.