Naxa NTD-2255 Instruction manual - page 18
Page 18
Naxa Electronics
Using the Remote Control
Aim the IR emitter of the remote control at the remote
sensor on the front of the unit and then press a key. The
remote control will work within 20 feet of the remote
sensor.
Connect Power
The unit can be powered with the AC power adapter or
the DC car adapter.
Using the AC Power Adapter
Use the included AC power adapter to connect the unit
to AC household power.
• Connect the two-pronged end of the adapter to a
household power outlet.
• Connect the barrel plug end of the adapter to the
Power socket [15] of the unit.
⚠
⚠
The adapter supports AC 110-240V power
only.
Do not connect the power adapter to a
power outlet other than that which is
indicated here or on the label as this may
result in the risk of fire or electric shock.
Do not handle the power plug with wet
hands. Doing so may cause electric shock.