Naxa NTD-2255 Instruction manual - page 35

www.naxa.com 

Page 35

Show/Hide

Mark a channel to be shown or hidden in 

the Channels list. 

Note: You can use the ADD/ERASE key 

on the remote to show or hide channels 

in the Channels list.

Channel No.

Change the current channel.

Channel Label

Change the channel label.

DTV Signal

The strength of the DTV signal is shown 

when the TV is connected to an antenna 

or cable TV signal source. 

This item is not adjustable.

USB Source Mode

Set the input source to USB to play digital media from 

the USB port [16] found on the rear panel of the TV.

⚠

L

The USB port is designed for media play-

back from flash memory devices. It is not 

designed to charge high-power devices.

The USB drive should contain compatible 

photo/music files for playback.

Press SOURCE [8] to access the input source menu, then 

press CH– or CH + [5, 6] to select USB. Press SOURCE [8] 

again to confirm the selection.