- DL manuals
- NCR
- Touch terminals
- 7454
- Site Preparation Manual
NCR 7454 Site Preparation Manual - Ventilation Clearance
Summary of 7454
Page 1
Ncr 7454 retail terminal release 2.2 site preparation guide ncr b005-0000-1257 issue c.
Page 2
The product described in this book is a licensed product of ncr corporation. Ncr is a registered trademark of ncr corporation. Ncr realpos, ncr realscan, and ncr easypoint are either registered trademarks or trademarks of ncr corporation in the united states and/or other countries. It is the policy ...
Page 3: Preface
7454 retail terminal site preparation i preface this is a contractual document. It contains important warnings and confers important legal rights and obligations. You are advised to read it carefully. It is the responsibility of the customer to assure that all installation preparations are complete ...
Page 4
Ii 7454 retail terminal site preparation lithium battery warning caution: danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type as recommended by the manufacturer. The battery is battery is recyclable. At the end of its useful life, under various state...
Page 5
7454 retail terminal site preparation iii environmental consciousness ncr is demonstrating its concern for the environment by designing an intelligent power management system into this terminal that operates efficiently whether the system is in a stand-alone or network environment. Grounding instruc...
Page 6: About This Book
Iv 7454 retail terminal site preparation about this book this book provides site preparation information for terminal components. Peripheral component and ac wiring site preparation information is not provided in this book. The associated reference documents are listed in the "related site preparati...
Page 7: References
7454 retail terminal site preparation v no comment, suggestion, or advice offered or not offered about preparation of the site, nor any inspection of the site, whether before of after preparation, is to be taken as approval of the location of the site and equipment or its preparation. Ncr will not b...
Page 8
Vi 7454 retail terminal site preparation.
Page 9: Table of Contents
7454 retail terminal site preparation vii table of contents introduction 1 interpreting the model number..................................... 2 related site preparation data......................................... 3 accessing information products .................................... 3 customer resp...
Page 10
Viii 7454 retail terminal site preparation ncr 7167 thermal receipt and impact slip printer....................................................................... 16 ncr 7194 printer..................................................... 17 ncr 7196 printer................................................
Page 11
7454 retail terminal site preparation ix printer interface cables (rs-232) ........................... 37 printer power cables .............................................. 38 ncr 5972-1000 remote customer display and adapter cables........................................................ 39 externa...
Page 12: Revision Record
X 7454 retail terminal site preparation revision record issue date remarks a sep 00 first issue (release 1.5) b feb 01 updated to release 2.0 added 2214 printer c dec 02 updated to release 2.2.
Page 13
7454 retail terminal site preparation xi radio frequency interference statements federal communications commission (fcc) information to user this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of fcc rules. These limits are designed to...
Page 14
Xii 7454 retail terminal site preparation voluntary control council for interference (vcci) international radio frequency interference statement this is a class a product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate meas...
Page 15: Declaration of Conformity
7454 retail terminal site preparation xiii declaration of conformity manufacturer's name ncr corporation manufacturer's address ncr corporation retail solutions division – atlanta 2651 satellite boulevard duluth, ga 30096-5810 type of equipment information technology equipment model number class 745...
Page 16
Xiv 7454 retail terminal site preparation.
Page 17: Site Preparation
Site preparation introduction 18051 7454 ncr this document provides the information necessary to prepare a site to ncr specifications prior to installing a terminal. The site must be properly prepared before the terminal is installed because site preparation deficiencies may be difficult to detect a...
Page 18
2 7454 retail terminal site preparation interpreting the model number release 1 22 = base unit with 12.1" lcd release 2 32 = 12.1" summa pos, celeron 600 mhz (g105) release 2.2 34 = 12.1" summa pos, celeron 700 mhz (g105) 35 = 15" summa pos, celeron 700 mhz (cg01) 36 = 12.1" summa pos, celeron 700 m...
Page 19
7454 retail terminal site preparation 3 related site preparation data ac power and communications wiring title order number ncr ethernet communications wiring guide bst0-2118-82 ncr terminal ac power wiring guidelines bst0-2115-53 peripherals title order number ncr 7158 thermal receipt/impact printe...
Page 20: Customer Responsibilities
4 7454 retail terminal site preparation customer responsibilities before the system can be installed, the customer must do or provide the following: • when required by ncr, provide the ncr customer services representative with appropriate drawings that indicate: − location of the equipment − site wi...
Page 21: Lan Communications
7454 retail terminal site preparation 5 ac store wiring requirements the customer must provide suitable ac power for the retail terminals, associated equipment, and devices. A dedicated unswitched power line dedicated to the ncr equipment installation is recommended. Refer to the workstation and per...
Page 22: System Configuration Diagram
6 7454 retail terminal site preparation system configuration diagram 18470b 2260/2183/2189 2nd cash drawer (y-cable) 5972/5973 ps/2 kbd vga pos connector bd. Usb audio rs232 (4) 2 optionally powered customer display (parallel) cash dwr 2336-k007 ethernet 2336-k008 2113 7196 7166 2010 coin dispenser ...
Page 23: Physical Considerations
7454 retail terminal site preparation 7 physical considerations this section presents the following retail terminal information: • operating and service clearance requirements • display mounting considerations • retail terminal and component dimensions • component weights • airflow requirements • po...
Page 24
8 7454 retail terminal site preparation operating and service clearance requirements location component distance reason above 2214 printer 371 mm (14.6 in.) clearance to raise printer cover 7158 printer 305 mm (12 in.) clearance to raise printer cover 7166 printer 280 mm (11 in.) clearance to raise ...
Page 25: Component Dimensions
7454 retail terminal site preparation 9 component dimensions ncr 7454 (12.1 inch) 15970 380 mm (15.0 in.) 360 mm (14.0 in.) 370 mm (14.5 in.) 400 mm (16 in.).
Page 26
10 7454 retail terminal site preparation ncr 7454 (15 inch) 18134 394 mm (15.5 in.) 425 mm (16.75 in.) 412 mm (16.25 in.) 35 mm (14.0 in.).
Page 27
7454 retail terminal site preparation 11 ncr 7454 (12.1 inch) with pcmcia 40.7 mm (1.6 in.) 53.4 mm (2.1 in.) 73.7 mm (2.9 in.) 312 mm (12.3 in.) 18200 370 mm (14.5 in.) 401mm (15.8 in.) 381 mm (15.0 in.) ncr 7454 (15 inch) with pcmcia 18201 426 mm (16.8 in.) 391 mm (15.5 in.) 14.3 mm (0.6 in) 53.4 ...
Page 28
12 7454 retail terminal site preparation ncr 7454 (12.1 inch) w/k450 integrated customer display 16716 480 mm (19.0 in.) 366 mm (14.3 in.) 400 mm (16 in.).
Page 29
7454 retail terminal site preparation 13 ncr 7454 (15 inch) w/k450 integrated customer display 16716a 480 mm (19.0 in.) 366 mm (14.3 in.) 425 mm (18.75 in.) 394 mm (15.5 in.).
Page 30
14 7454 retail terminal site preparation ncr 2183 cash drawer 18038a 455 mm (17.9 in.) 114 mm (4.50 in.) 450 mm (17.7 in.) operating and service clearance for drawer 263 mm (10.4 in.) ncr 2189 cash drawer 16676 133 mm (5.25 in.) 330 mm (13 in.) (18.25 in.) operating and service clearance for drawer ...
Page 31
7454 retail terminal site preparation 15 ncr 2113 cash drawer 17310 96 mm (3.75 in.) 400 mm (15.75 in.) 450 mm (17.75 in.) 254 mm (10 in.) operating and service clearance for drawer ncr 7158 printer 165 mm (6.50 in.) 336 mm (13.25 in) 229 mm (9.00 in) 305 mm (12.00 in.) 17307.
Page 32
16 7454 retail terminal site preparation ncr 7166 printer 171 mm (6.75 in.) 248 mm (9.75 in.) 330 mm (13.00 in.) 280 mm (11.00 in.) 17308 ncr 7167 thermal receipt and impact slip printer 19711b 190 mm (7.5 in.) 174 mm (7.0 in.) 262 mm (10.3 in.) 316 mm (12.5 in.) top cover open 296 mm (11.7 in.).
Page 33
7454 retail terminal site preparation 17 ncr 7194 printer 16492 130 mm (5.10 in.) 157 mm (6.20 in.) 85 mm (3.30 in.) 212 mm (8.3 in.) 187 mm (7.4 in.) ncr 7196 printer 108 mm (4.25 in.) 140 m (5.50 in.) 146 mm (5.75 in.) 254 mm (10.00 in.) 17306.
Page 34
18 7454 retail terminal site preparation ncr 7197 thermal receipt printer 19712c 146 mm (7.75 in.) 156 mm (6.25 in.) 184 mm (7.25 in.) top cover open 256 mm (10.1 in.) ncr 2214 thermal fiscal printer 278 mm (11 in.) 175 mm (6.9 in.) 371 mm (14.6 in.) 210 mm (8.3 in.) 18542.
Page 35
7454 retail terminal site preparation 19 ncr 5974 4x20 remote customer display 16673 95 mm (3.75 in.) 506 mm (22.1 in.) 50 mm (3.5 in.) 95 mm (3.75 in.) 180 mm (7 in.) 110 mm (4.25 in.).
Page 36
20 7454 retail terminal site preparation ncr 5972-1000 2x20 remote customer display 262 mm (10.3 in.) 15708 95 mm (3.75 in.) 506 mm (22.1 in.) 30 mm (1.2 in.) 95 mm (3.75 in.) 119 mm (4.7 in.).
Page 37
7454 retail terminal site preparation 21 integrated 5973 international vfd customer display 350 mm (13.8 in.) 45 mm (1.8 in.) 95 mm (3.75 in.) 95 mm (3.75 in.) 110 mm (4.3 in.) 262 mm (10.3 in.) 17236a.
Page 38
22 7454 retail terminal site preparation 5973 international vfd customer display 556 mm (21.9 in.) 45 mm (1.8 in.) 95 mm (3.75 in.) 95 mm (3.75 in.) 110 mm (4.3 in.) 262 mm (10.3 in.) 17236.
Page 39
7454 retail terminal site preparation 23 remote 5973 international vfd customer display 17237 262 mm (10.3 in.) 158 mm (6.2 in.) 173 mm (6.8 in.) 110 mm (4.3 in.) 45 mm (1.8 in.) 178 mm (7.0 in.).
Page 40
24 7454 retail terminal site preparation ncr 2336-k007 external cd-rom drive 23 mm (0.9 in.) 155 mm (6.1 in.) 218 mm (8.6 in.) 16951 note: allow 75 mm (3 in.) clearance in the back of the ncr 2336-k007 external cd-rom drive for connector and cable clearance. Ncr 2336-k008 usb rs-232 port server 183 ...
Page 41: Component Weights
7454 retail terminal site preparation 25 component weights the following table shows the weight of the 7454 retail terminal components. Retail terminal component kg lbs. 2189 cash drawer 9.5 20.9 7454-k005 cash drawer 11.4 25.15 7454-k453 remote customer display 0.7 1.5 5972-1000 remote customer dis...
Page 42: Ventilation Clearance
26 7454 retail terminal site preparation ventilation clearance the following illustration shows the minimum clearances for proper cooling. 16418 76 mm (3 in.) 25 mm (1 in.) minimum vertical clearance minimum horizontal clearance.
Page 43: Power Requirements
7454 retail terminal site preparation 27 power requirements core module contain a three-wire, single-phase, selectable 120/240 volt ac, 85 watt power supply. The supply powers the retail terminal, scanner, vfd display, keyboard, usb interface, cash drawer, integrated speakers, and pcmcia cards. The ...
Page 44
28 7454 retail terminal site preparation 7454 power consumption matrix the following table is provided as a reference of the power consumption of the peripherals available on the 7454 note: all power data listed in table below is rated in amperage. Item description 3.3vdc 5.0vdc 12vdc requires exter...
Page 45
7454 retail terminal site preparation 29 item description 3.3vdc 5.0vdc 12vdc requires external power source (2336-k008, 497-0413014) usb to 2 port rs-232 (2336-k012, 497-0413710) 0.50 pcmcia controller 0.40 irda 0.50 5992 signature capture device (497-0417590) 0.80 5945 electronic payment device (4...
Page 46
30 7454 retail terminal site preparation considerations for enclosed installations thermal test points with the terminal installed in the enclosure, verify that the temperature does not exceed 45 o c (115 o f) in the operating environment. Thermal test points are shown below: 18055a thermal test poi...
Page 47: Flush Wall Mount
7454 retail terminal site preparation 31 flush wall mount the 7454 can be mounted flush against a wall. The following shows mounting configuration and brackets: 16683 flush mount w/power supply mounted on the outside wall flush mount w/power supply mounted on the inside wall note: refer to the cable...
Page 48
32 7454 retail terminal site preparation power supply 152 mm (6 in.) 102 mm (4 in.) 57 mm (2.25 in.) 17406 wall mount the terminal bracket drill a hole in the wall for the cables if you are mounting the power supply on the opposite side of the wall. 16684 flush mounting bracket wall plate cable rout...
Page 49: System Cables
7454 retail terminal site preparation 33 system cables cable type cable name ncr part no. Corp. Id no. Approximate cable length cash drawer dual drawer, y cable 497-0409394 1416-c372-0006 0.6 m/2 ft. Communications ethernet, 10/100base-t 497-0008623 (unshielded) usb 497-0415949 1416-c528-0010 1 m/3....
Page 50
34 7454 retail terminal site preparation cable type cable name ncr part no. Corp. Id no. Approximate cable length printer extender drop cables (7453-k641) 7161/7166/7196 printer/workstation 497-0411815 1416-c417-0040 4 m/13 ft. 7193/7194 printer 497-0411816 1416-c418-0040 4 m/13 ft. Printer power su...
Page 51: Cable Illustrations
7454 retail terminal site preparation 35 cable illustrations dual cash drawer, y-cable 15808 51 mm (2.0 in.) 16 mm (0.625 in.) access hole diameters cash dwr. #1 cash dwr. #2 497-0409394 ethernet, 10/100 base-t 16298 19 mm (.75 in.) 19 mm (.75 in.) access hole diameters modular 8-pin plug modular 8-...
Page 52
36 7454 retail terminal site preparation usb, 1- or 4-meter 18433 type a usb 15 mm (0.63 in.) access hole diameters 6.4 mm (0.25 in.) 497-0415949 (1 meter) 1416-c528-0010 498-0415950 (4 meter) 1416-c528-0040 p1 type b usb p2 1 2 3 4 1 2 3 4.
Page 53
7454 retail terminal site preparation 37 printer interface cables (rs-232) 7161/7166/7196 13224 63.5 mm (2.5 in.) 38 mm (1.5 in.) access hole diameters printer 497-0407427 - 1 m 497-0407429 - 4 m 497-0407430 - 15 m workstation rs-232 port 9-pin d-shell receptacle 25-pin d-shell plug 7193/7194/7158 1...
Page 54
38 7454 retail terminal site preparation ncr 7161 printer with 7454-k641 cable extender 16294 workstation rs-232 port 9-pin d-shell receptacle 25-pin d-shell plug 497-0411815 - 4m 1416-c417-0040 7453- k641 7161 printer 25-pin d-shell receptacle 9-pin d-shell plug 497-0411815 - 4m 1416-c417-0040 ncr ...
Page 55
7454 retail terminal site preparation 39 ncr 5972-1000 remote customer display and adapter cables 16291 to power brick 8-pin microfit receptacle to customer display to 7454 cust. Display port 497-0405676 - 4 m 1416-c278-0040 25-pin d-shell receptacle 24-pin microfit receptacle 25 mm (1.0 in.) 57.1 m...
Page 56
40 7454 retail terminal site preparation external cd-rom cable 16959 to cd-rom power connector smk 2 mm plug to cd-rom parallel connector 497-0413011 - 0.6 m 1416-c464-0006 25-pin d-shell receptacle 28-pin sub-miniture d-plug 31 mm (1.25 in.) 57 mm (2.25 in.) access hole diameters 12 mm (0.5 in.) to...
Page 57
7454 retail terminal site preparation 41 automatic change dispenser serial cable 18056 497-0404832 9-pin d-shell receptacle 25-pin d-shell plug p2 1 6 5 9 p1 1 14 13 25 power, ac 15405 45 mm (1.75 in.) access hole diameter workstation 006-1009037.
Page 58: Environmental Requirements
42 7454 retail terminal site preparation environmental requirements barometric pressure the 7454 retail terminal is designed to operate within the following barometric pressure conditions: • maximum operating altitude: 3,000 m (9,843 ft.) • operating range of pressure: 105 kpa to 69 kpa (15.2 lb/in....
Page 59: Humidity
7454 retail terminal site preparation 43 humidity the 7454 retail terminal is designed to operate within the humidity ranges shown below. Continuous operation must be avoided, however, at or near the humidity limits, or in locations where humidity changes exceed the humidity restrictions. In no case...
Page 60
44 7454 retail terminal site preparation.
Page 61
Appendix a: transient protection ac power line transient protection in the process of power distribution, transient electrical energy (including, but not limited to, lightning strikes, intermittent short circuits, and switching transients) can be introduced onto power lines. Such transient energy ca...
Page 62
A-2 appendix a: transient protection • be listed by the accepted safety organization for the country involved (ul, csa, vde, etl, and so on) and the installation must conform to local, state, and national electrical codes and regulations. Data line transient protection the nature of the transient ph...
Page 65: Index
Index —2— 2113 cash drawer, 15 2183 cash drawer, 14 2189 cash drawer, 14 2214 thermal fiscal p, 18 2336-k007 external cd-rom drive, 24 2336-k008 usb rs-232 port server, 24 —5— 5972-1000 2x20 remote customer display, 20 5973 international vfd customer display, 22 5974 4x20 remote customer display, 19...
Page 66: —D—
—d— data line transient protection, 2 dimensions, 9 —e— environmental requirements, 42 barometric pressure, 42 humidity, 43 temperature, 42 —f— flush wall mount, 31 —h— humidity, 43 —i— integrated 5973 international vfd customer display, 21 —m— model number, 2 —n— ncr 7197 thermal receipt printer, 1...
Page 68
B005-0000-1257 dec 2002 printed on recycled paper.