NDS VIMA User Manual - page 15
VIMA Overview and Installation | 7
VIMA Video Recorder
VIMA Video Recorder has three video input ports and no video output ports as detailed in the Ports table below.
Two Accessory ports are provided for camera remote controls. Audio ports are provided for audio services.
VIMA Video Recorder has seven control ports. A display port (DP++) and an HDMI port (HDMI 1 Touch) are
provided to connect one or two 1080p touch displays for VIMA GUI. One LAN port provides network connectivity
and four USB ports for control devices (keyboard and mouse) and accessories.
T
he DC output port is only for an ELO 15.6 touch display.
Only devices without PoE or with PoE implemented according to 802.3at Type 2 Class 3 (resp.4) can be
connected. Connection of devices which do not have PoE implemented according to this standard (for
example with PoC or PoH marking) will cause the damage of VIMA.
Note: There are two LAN ports on VIMA, however only LAN 1 is active.
Port Type
Number of Ports
Notes
Accessory Ports
ACC
2
For use with video and still image control devices. ACC 1 is used for image
capture trigger. ACC 2 is used for start/stop recording trigger.
USB (Front panel)
1
Connect a USB device to export captured images and videos, or external
keyboard. This is USB 2.0.
This USB port can be used in combination with the HDMI 1 or DP++ ports
for a Touch screen connection, but is not recommended.
Video Input Ports
HDBaseT In
1
PoE (30 Watts) will be provided. (802.3at Type 2 Class 4)
3G-SDI In
1
DVI-D
1
Audio
Line Out
1
Mic In
1
Management and Control Ports
DP++
1
Only accepts a Display Port connector. Will automatically detect DP or
HDMI signal.
HDMI 1 Touch
1
Accepts both DP and HDMI connector. Will only accept an HDMI signal.
LAN
2
Only LAN 1 is active. LAN 2 is an inactive port and the control indicators do
not work.
USB
4
Connect a USB device to export captured images and videos, or external
keyboard to any of the USB ports.
Any of the four USB ports can be used in combination with the HDMI 1 or
DP++ ports for a Touch screen connection.
These are USB 3.0.
Other Ports
DC output
1
The DC output port is only for an ELO 15.6 touch display.