NEAR 7XL Installation & User Manual - page 12
8
Software Control
Home/Level window.
1.
Load: clicking on this icon, a window will open allowing to load a preset previously stored
within the PC.
2.
Save: clicking on this icon, a window will open allowing storage of the current preset
within the PC.
Note: The user can select a folder for saving and assign a name to the preset.
3.
Store: clicking on this icon, a window will open allowing the preset to be saved in the amplifier
hardware. Here the preset can be stored in one of 16 positions and a preset name can be
assigned. Once a preset is stored within one of the 16 available locations, it will be access-
ible via the amplifier front panel and its name will be displayed on the LCD screen.
4.
Recall: clicking on this icon, a window will open allowing selection of the 16 presets stored
in the amplifier, recalling one as the current, active preset.
5.
Copy (IN): clicking on this icon, a window will open allowing the copying of all parameters of
one input channel to another one.
6.
Copy (OUT): clicking on this icon, a window will open allowing the copying of all parameters of
one output channel to another one.
7.
Input Link: Gives the user the option to LINK together the 2 input channels. When the
2 channels are linked, editing on one channel will be reflected on the other.
8
. Output Link: Gives the user the option to LINK together any of the output channels.
When the channels are linked, editing on one channel will be reflected on the other(s).
9.
L/D/A/B/1/2/3 Buttons: clicking on these buttons will allow the opening of the specified DSP
procesing windows, allowing further feature adjustments.
10.
Version: Provides revision level for Software, Firmware, and DSP.
11.
Stand By Mode: Puts the amplifier into low-power energy consumption mode. This button
mimics the same function as the Front Panel “Stand-By” button.
From the Home/Level window the following
Tool Bar
actions can be taken:
1
2
3
4
5
6
7
8
9
10
11