Neato Robotics Vacuum Quick Start Manual - Turn to Run Mode...
Quick Start Guide
...then plug in the charging base
Place the base 3 feet from any corner and make sure
there is space in front of the charging base for the
Neato Vacuum to dock. Plug the charging base into
the wall.
Select language and charge your Neato Vacuum
Place your Neato Vacuum up against the
charging base.
The LCD screen will light up and prompt you to
select a language for the display screen. Use
the up and down arrows to select the language,
then press SELECT.
Once the language is selected, the light around
the START button will light up to let you know
it is charging. When it is solid green in approxi-
mately 2 to 3 hours, it’s ready to clean.
1
2
Ensure that the base is sitting up against
a wall and is not tilted forward.
Register your
Neato and get the
complete user manual at:
NeatoRobotics.com
OFF
O
OFF
ON
Turn to Run Mode...
Remove dirt bin, and locate
the
ON/OFF
switch.
Push the switch
DOWN
to turn your Neato to
ON
.
Replace the dirt bin.