Summary of 7*15W 4in1
Page 1
User manual led beam 7*15w 4in1 keep this manual for future needs.
Page 3: 1. Unpacking
1 1. Unpacking thank you for choosing our led beam . For your safety, please read this manual before installing the device. This manual covers the important information on installation and applications. Please install and operate the fixture with following instructions. Meanwhile, please keep this m...
Page 4: 2. Safety Instructions
2 2. Safety instructions this device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. If the device has been exposed ...
Page 5: 3. Operation Instructions
3 3. Operation instructions -the moving head is for wash effect for on-site decoration purpose. -don’t turn on the fixture if it’s been through severe temperature difference like after transportation because it might damage the light due to the environment changes. So make sure to operate the fixtur...
Page 6
4 never stand directly below the device when mounting, removing, or servicing the fixture from a periodic safety inspection of all installation material and the fixture. If you lack these qualifications, do not attempt the installation yourself. Improper installation can result in bodily injury. Be ...
Page 7: 120Ω
5 5. Dmx-512 control connections connect the provided xlr cable to the female 3-pin xlr output of your controller and the other side to the male 3-pin xlr input of the moving head. You can chain multiple when serial this fixture linking .The cable should be two core, screened cable with xlr input an...
Page 8: 6.Menu Operation
6 6.Menu operation address run dmx512 auto(1-8) test sound pan（0-255） tilt（0-255） red（0-255） green（0-255） blue（0-255） whilt（0-255） language english setup id code（0-25） pan reverse （ start/finish） tilt reverse （ start/finish） fader delay（start/finish） signal link（start/finish） code wheel（start/finish...
Page 9
7 main menu the user can control the cursor via button, with pressing “enter” to start setting. Dmx add setting submenu contains address setting, running mode, testing mode, language setting, advanced setting and system information, and the user can operate these modules according to soft button in ...
Page 10
8 be effective. Pan reverse setting tilt reverse settingy fader delay when putter delay starts, the dimmer of console fader becomes soft. Putter delay can decide whether start or not through console signal link-after signal connection starts, it will cut light when console signal closes. Code wheel-...
Page 11: 7. Dmx 15 Channels
9 7. Dmx 15 channels chanel function values description 1 dimmer 0-255 0-100% linear dimmer from dark to bright 2 red 0-255 0-100% red dimmer from dark to bright 3 green 0-255 0-100% green dimmer from dark to bright 4 blue 0-255 0-100% blue dimmer from dark to bright 5 white 0-255 0-100% white dimme...
Page 12: 8. Photometric Data
10 8. Photometric data . Dmx 11 channels chanel function values description 1 dimmer 0-255 0-100% linear dimmer from dark to bright 2 red 0-255 0-100% red dimmer from dark to bright 3 green 0-255 0-100% green dimmer from dark to bright 4 blue 0-255 0-100% blue dimmer from dark to bright 5 white 0-25...
Page 13: 9. Key Features
11 9. Key features 7pcs 15w 4-in-1 leds (r,g,b,w ) 60,000 hours life span for leds and low power consumption intelligent temperature sensor for leds(over heat protection) high efficiency 8 degree optic lens color range with 16.7 millions additive rgbw colors high light output as 860lux@ 7m at full 0...
Page 14
12 11. Maintenance and cleaning the following points have to be considered during the inspection: 1. All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded. 2. There must not be any deformations on the housing, color lenses, fixations and i...