Nebula 7*15W 4in1 User Manual - page 10
8
be effective.
Pan Reverse SETTING
Tilt Reverse SETTINGY
Fader Delay When PUTTER DELAY starts, the dimmer of console
fader becomes soft. PUTTER DELAY can decide whether start or
not through console
Signal Link-After SIGNAL CONNECTION starts, it will cut light
when console signal closes.
Code Wheel-If it closes, encoder disk will fail, and cannot record
Pan/Tilt correct position. When it recovers from error track, the reset
will switch from Code Wheel- into maximum stroke reset.
Temp Switch Set-Switch with temperature protection function
Temperature Set-Protection temperature, with the function, if the
machine measure actual temperature is beyond protection
temperature, the brightness effect will fall half.
Screen Saver. The user can set CLOSE,MODE1, MODE2.When
machine
closes,
it
won’t
enter
screen
protection
situation;MODE1,when display presentation finishes, it will be
cleaned;MODE2,when machine enters display protection status,
current address code will be display with large font. The user can
touch the screen to cancel screen protection status, and return to
main menu.
Display Reverse can make the screen upside down180°.
Factory Set is to set the parameter as the initial factory settings.
RESET
Pan Offset
Tilt Offset,
5)
System
display related information about system ,as picture 6 ,
Turn-on time. The time is on electric power.
RUNNING TIME, total lighting time.
SOFTWARE VERSION. Program version currently in use.
RUNNING MODE. The mode is running in current system.
ADDRESS CODE
TEMPERATURE - Temperature of light broad.