NEC 120Ef User Manual - page 11

Using This Guide ix

■

Be sure to power off the equipment and unplug its power cords from the wall outlet

before installation/relocation. All voltage is removed only when the power cords

are unplugged.

■

Turn off your cellular phone or pager when you use the equipment. Their radio

waves may cause the equipment to malfunction.

■

Do not use damaged power cords. Replace it with a new one of the same type.

■

In the U.S.A. and Canada, the power cord must be a UL-listed detachable power

cord (in Canada, CSA-certified), type ST or SJT, 16 AWG, 3-conductor, provided

with a molded-on NEMA type 5-15 P plug cap at one end and a molded-on cord

connector body at the other end. The cord length must not exceed 9 feet (2.7

meters).

■

Outside the U.S.A. and Canada, the plug must be rated for 250 VAC, 10 amp

minimum, and must display an international agency approval marking. The cord

must be suitable for use in the end-user country. Consult your dealer or the local

electrical authorities if you are unsure of the type of power cord to use in your

country. The voltage change occurs via a switch in the power supply.