NEC DT750 User Manual - Setup With Feature Key
34
SETUP WITH FEATURE KEY
• MICROPHONE ON/OFF
STEP 1: LED on
shows the status of the built-
in microphone.
STEP 2: Press soft key associated with the MIC Dis-
play or press
and
.
• CALL INDICATOR LAMP ON/OFF
You can choose to turn the call indicator lamp either on
or off during ringing.
STEP 1: Press
and
. The LCD displays:
• SELECT DIAL MODE
You can select one pattern from Normal, Dynamic Dial
Pad or Preset Dial to originate a call.
When only Dynamic Dial Pad is activated:
To Set/Reset Dynamic Dial Pad
STEP 1: Press
and
. The LCD displays:
Note
The call indicator lamp lights when used as Message
Waiting Lamp, even when it is turned off by the above
operation
Mic
Feature
1
Feature
7
7:26 AM MON 12 JUL 2010
MIC
>>>
DND
INDICATOR ON
7:26 AM MON 12 JUL 2010
MIC
>>>
DND
INDICATOR OFF
TIP
When this feature is ON, you may initiate a call by
immediately dialing the number and the station will go
hands-free off-hook automatically. For details, see
TO
ORIGINATE A CALL USING SELECTIVE DIALING
(DYNAMIC DIAL PAD, PRESET DIAL)
.
Feature
8
7:26 AM MON 12 JUL 2010
MIC
>>>
DND
Direct Dial Pad ON
7:26 AM MON 12 JUL 2010
MIC
>>>
DND
Direct Dial Pad OFF