NEC DT750 User Manual - Setup With Menu Key
35
When only Preset Dial is activated:
To Set/Reset Preset Dial
STEP 1: Press
and
. The LCD displays:
When both Dynamic Dial Pad and Preset Dial are
activated:
To Set Dial Mode
STEP 1: Every time
and
are pressed, Dial
Mode switches. The LCD displays:
SETUP WITH MENU KEY
• TO ENABLE/DISABLE OFF-HOOK
RINGING
The procedure below shows how to enable/disable Off-
hook ringing.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select
User Setting.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using
, and press
,
TIP
When this feature is ON, you may initiate a call by
pressing Speaker or going off-hook after dialing the
number. For details, see
TO ORIGINATE A CALL
USING SELECTIVE DIALING (DYNAMIC DIAL PAD,
PRESET DIAL)
.
Feature
8
7:26 AM MON 12 JUL 2010
MIC
>>>
DND
Preset Dial ON
7:26 AM MON 12 JUL 2010
MIC
>>>
DND
Preset Dial OFF
Feature
8
Note
It means that Dial Mode displayed on LCD is ON.
7:26 AM MON 12 JUL 2010
MIC
>>>
DND
Dial Mode: Direct
7:26 AM MON 12 JUL 2010
MIC
>>>
DND
Dial Mode: Preset
7:26 AM MON 12 JUL 2010
MIC
>>>
DND
Dial Mode: Normal
1