NEC E324 User Manual - Important Information
English-5
English-4
Important Information
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG
WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE
PRONGS CAN BE FULLY INSERTED
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE
COMPONENTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE
POWER CORD IS UNPLUGGED FROM WALL SOCKET TO FULLY
DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT
THE POWER CORD FROM THE AC OUTLET DO NOT REMOVE
COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol warns user that uninsulated voltage within the unit may
have sufficient magnitude to cause electric shock. Therefore, it is
dangerous to make any kind of contact with any part inside this unit
This symbol alerts the user that important literature concerning the
operation and maintenance of this unit has been included Therefore, it
should be read carefully in order to avoid any problems
CAUTION:
Please use the power cord provided with this monitor in accordance with the
table below If a power cord is not supplied with this equipment, please contact
your supplier For all other cases, please use a power cord that matches the
AC voltage of the power outlet and has been approved by and complies with
the safety standard of your particular country
Plug Type
European
Continental
U.K.
Japanese
North America
Plug Shape
Region
EU
(except U K )
U K
Japan
U S A /Canada
Voltage
230
230
100
120
This LCD display operates on 100-240 volts 50-60 Hz, AC current Insert the
power cord into a 100-240 volts 50-60 Hz outlet The mains plug is used as
the disconnect device and shall remain readily operable