NEC LCD8205 - MultiSync - 82" LCD Flat Panel Display Installation Manual
NEC Display Solutions of America, Inc.
LCD8205 Installation Guide
82” LCD Display
Rev 1.2
www.necdisplay.com
Contents:
Product Description and Notes
Page 1
Tilt
Angle
and
Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top & Right Side
Page 3
Front, Top & Right Side with protective glass
Page 4
Rear, Bottom & Left Side
Page 5
Dimensions Optional Fixed Wall Mount in Landscape
Page 6
Dimensions Optional Fixed Wall Mount in Portrait
Page 7
Dimensions Optional Tilt Wall Mount in Landscape
Page 8
Dimensions Optional Tilt Wall Mount in Portrait
Page 9
Control Codes
Page 10
Product Description
Type:
LCD Display
Screen Surface:
Anti-Reflective
Resolution:
1920 x 1080
Dimensions:
75.8”(W) x 44.8”(H) x 5.9”(D)
Aspect Ratio:
16:9
with protective glass:
75.8”(W) x 44.8”(H) x 6.3”(D)
FCC:
Class A
Weight:
291.0 lbs
Power Consumption: 680W (max)
with protective glass:
346.1 lbs
BTU’s:
2320
BTU/hour
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
LCD8205 Page 1 of 10
Max. 20 deg