NEC N-730E User Manual - Memory Cooking
U
14
If you often cook or reheat the same types of dishes, you can store the cooking times and functions in the
oven’s memory, so that you do not have to reset them each time. You can store one cooking.
Example : To set memory
1. Touch the Memory button.
2. Set your cooking programme as usual.
3. Touch memory button.
The oven will beep and the display reverts to the time of day. Your settings are now stored in the oven’s
memory.
To store different settings simply repeat setting procedure.
Example : To use memory
1. Touch memory button. Storing settings in the oven’s memory appears in the display.
2. Touch start button. ( The oven light comes on and the turntable starts rotating. Cooking starts and the
time in the display will count down. )
The Hold Warm function is used to keep food warm for a maximum of 30 minutes
(in steps of 10 minutes) after cooking has finished.
Example : To set the Hold Warm function
1. Set your cooking programme as usual.
2. Touch
Hold Warm button. (Once for 10 mins. Twice for 20 mins and three times for 30 mins.)
This function allows you to program a start time for your cooking (Up to 11 hours and 59 minutes in advance.)
Example : To set Auto Start
1. Set your cooking programme as usual.
2. Touch
the
Auto Start button.
3. Enter the desired start time using the number pad.
4. Touch
Start.
If the oven door is opened before the cook time has started you will have to press the start button again
once the door has been closed. Some foods may spoil if left at room temperature for too long.
Hold Warm can only be used with one stage microwave cooking.