NEC NP-UM330W Installation Manual
NEC Display Solutions of America, Inc.
UM330W Installation Guide
Desktop and Ceiling Mount
v1.1
www.necdisplay.com
UM330W
Page 1 of 8
Contents
Product Description, Lens Specs, Notes and Formulas
Page 1
Diagrams and Distance Charts
Ceiling
Mounted
Installation
Page
2
Desktop
Setup Page
3
Cabinet Dimensions
Top,
Bottom,
Front,
Left
and
Right
Side
Page
4
Bottom
Page
5
Optional
Wall
Mount
Dimensions Page
6
Optional Wall Mount Dimensions cont. Page 7
Input
Panel
and
Control
Codes
Page
8
Product
Description
Type:
0.63
inch
LCD
with
MLA
Dimensions:
14.9”(W)
x
6.5”(H)
x
16.9”(D)
Weight:
12.6 lbs
Native
Resolution:
1280
x
800 Screen
Range:
58.0”
–
110.0””
Diagonal
(16:10)
Brightness:
3300 lumens
Fan Noise: 35 dB / 28dB @ 1 meter
Power
Consumption:
360W
(max)
BTU’s:
1228.37
BTU/hour
Screen/Aspect Ratio_
Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.
Notes
For screen sizes not indicated on the projection charts, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary
5%.
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug the screen width in for “W” in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3.
Definitions:
4:3 Screen Formulas:
W
=
Screen
width
W = H x 4/3
H
=
Screen
height H = W x 3/4
A = Distance between projector cabinet and screen
Screen Diagonal = W x 5/4
B = Vertical distance between projector foot
and
screen
center
C = Throw distance
16:10 Screen Formulas:
D = Vertical distance between projector foot and screen bottom
W = H x 16/10
(screen
top
for
ceiling
mounted
application) H = W x 10/16
Screen Diagonal = W x 18.868/16
Projection Formulas:
A = C-13.52
B =
0.4229W+4.174
C
=
0.360W
D =
0.1104W+4.174