NEC VersaPro VB VC26M/BC-F User Manual - page 7
7
Power LED
*1 : Flashes about once every three seconds.
*2 : Flashes about once every two seconds.
Battery recharge LED
*1 : Battery recharging error, battery life, or deterioration error.
*2 : When the battery is fully charged, or nearly fully charged, there are some cases
where the LED does not turn on and the battery is no longer charged.
SD memory card slot access LED
Drive activity LED
Num Lock indicator LED
(20)
Wireless switch
(
)
This switch turns wireless LAN functionality on
and off.
(21)
Optical drive (models
with optical drives only)
Some models have an internal DVD SuperMulti
Drive.
It can read data from DVD and CD media, and on
some models, it can write data to DVD-R and
CD-R media.
(22)
Air vent
These holes are designed to allow internal heat to
escape. Avoid covering them with materials such
as hands or clothes.
(23)
SD memory card slot
This slot accepts "SD memory card", "SDHC
memory card", and "SDXC memory card".
(24)
Fax/Modem port
A telephone line can be connected for data
transmission, etc.
(25)
Internal microphone
This can be used for video conferencing, etc.
While you are using this microphone for recording,
it is not possible to play back what you are
recording through speakers at the same time.
(26)
Webcam
Used for video conferencing, etc. While the
webcam is in use, the indicator light on the side of
the webcam is on.
(27)
HDMI port
This is used to connect to HDMI compatible wide-
screen televisions or external displays that are
equipped with a HDMI port.
(28)
USB port (supports
USB 3.0, Power Off
USB Power Charge
function) (
)
This port can be used to connect to USB devices.
This USB port supports USB 3.0, USB 2.0, and
USB 1.1. In order to take advantage of USB 3.0
transfer speeds, it is necessary to be connected to
a USB 3.0 enabled device.
This port also supports the Power Off USB Power
Charge function. When charging a device
connected by a USB cable, the device can still be
charged even when the power of the computer is
turned off. In order to use this function, it is
necessary to configure settings in the [Advanced]
menu of the BIOS setup utility.
(29)
Ambient light sensor
This sensor is used to detect the brightness of the
surrounding area when the automatic screen
brightness adjustment function is being used.
Number
Name
Explanation
Status LEDs
LED state
Computer State
Blue
On
Computer power on
Flashing
Sleep
Orange
On
Low battery
Flashing
*1
Low battery during sleep
Quickly
flashing
*2
Extremely low battery
Off
Computer power off, or hibernating
LED state
Computer State
Orange
On
Battery recharging
Flashing
Battery error
*1
Off
The AC adapter is unplugged, or the battery is fully charged
*2
LED state
Computer State
On (Green)
The card in the SD memory card slot is currently being
accessed
Off
Not currently being accessed
LED state
Computer State
On (Green)
The hard disk or optical drive is currently accessing data.
Off
The hard disk or optical drive is not currently accessing data.
LED state
Computer State
On (Green)
a numeric keypad)
Off
NEC_Versa.fm Page 7 Friday, November 16, 2012 3:33 PM