North Star Design BLUE DIAMOND Operating Manual - page 13
Playback CD
You can start to play disc from first track pressing '
Play/
Pause', or you can select another one using
skip previous and next track keys, then confirm with '
Play/Pause
' key.
From numeric keys of remote control you can select directly the number of track, an automatically
will be played back.
This unit can play tracks using three types of playback modes:
Continuous playback (default setting)
the tracks on a disc are played back in numerical order.
Repeat all disc
when disc finish, the playback start again from the first track.
Repeat track
when a track finish, is repeated again. In pause mode, if you press skip previous or next track
keys, the player remain on the same track.
Press '
Repeat
' key to cycle through the playbacks mode.
Press '
Play/Pause
' key to put in pause the disc.
Press '
Stop
' to stop the disc.
In Stop or Pause or after reading a TOC, you can always select a track as described above.
Note:
When you have a disc from 10 to 99 tracks , the player consider the first digit you press from
remote as the ten. After few seconds if you don't select unity digit, it is played back the number of
track that is previously pressed.
If you press '0' as first number, the player waits until you press unity digit.
13