North Storm NS-14B-AC User Manual - Operation Introduction Cont.
10
OPERATION INTRODUCTION CONT.
Maximum
Cooling
Minimum
Cooling
Maximum
Heating
Minimum
Heating
DB/WB( 0F )
95/75
64/54
80/---
45/---
Before using
Notice: Operation temperature range:
Check up whether the exhaust hose has been
mounted properly.
Cautions for cooling and dehumidifying operations:
● When using functions on cooling and dehumidifying,
keep an interval of at least 3 minutes between each
ON/OFF.
● Power supply meets the requirements.
● The socket is for AC use.
● Do not share one socket with other appliances.
● Power supply is AC115V, 60Hz
Cooling Operation
● Press the “Mode” button till the “Cool” icon appears.
● Press the “ ”or“ ”button to select a desired room
temperature. (62-90 F0)
● Press the “Fan Speed” button to select wind speed.
Dehumidifying Operation
● Press the “Mode” button till the “Dehumidify Indicator
Lamp” blinks
● Set the selected temperature to current room temperature
minus 2F0. (62-90F0)
● Set the fan motor to LOW wind speed.
Fan operation
● Press the “Mode” button till the “Fan” icon appears.
● Press the “Fan Speed” button to select wind speed.
Heating operation (this function is not available for a cold-
single unit)
● Press the “Mode” button till the “Heat” icon appears.
● Press the “ ”or“ ” button to select a desired room
temperature. (62-90F0)
● Press the “Fan Speed” button to select wind speed.
Timer operation
Timer ON setting:
● When the air-conditioner is OFF, press the “Timer” button
and select a desired ON time through the temperature and
time setting buttons.
● “Preset ON Time” is displayed on the operation panel.