Northern Industrial Tools 276154 Owner's Manual - page 2
PAGE 1 OF 6
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product!
For future reference, please complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire
manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment cannot be
responsible for issues arising from modification. We strongly recommend this machine is not
modified and/or used for any application other than that for which it was designed. If you have
any questions relative to a particular application, DO NOT use the machine until you have first
contacted Northern Tool + Equipment to determine if it can or should be performed on the
product.
For technical questions please call 1-800-222-5381.
TECHNICAL SPECIFICATIONS
Size of the Mouth on the Head Part: 4 1/2in x 1in (120 x 25mm)
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
WARNING:
The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions or situations that could occur.
It must be understood by the operator that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.
CAUTION:
Use gloves and care when handling blades.
•
Machine must be turned off and unplugged prior to attaching tenderizing blades.
SAVE THESE INSTRUCTIONS.