9.6v rechargeable handheld chain saw sharpener user’s manual read carefully and understand rules for safe operation and instructions before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item # 19070
Page 2 of 10 for technical questions and replacement parts, please call 1-800-222-5381. Thank you very much for choosing a northern tool + equipment co., inc., product! For future reference, please complete the owner’s record below: model: _______________ purchase date: _______________ save the rece...
Page 3 of 10 warning: some dust created by construction activities contains chemicals that are known to cause cancer, birth defects or other reproductive harm. Always wear an ansi approved dust mask or respirator if working around chemicals. Save these instructions work area safety: 1. Keep work are...
Page 4 of 10 always wear safety goggles 1. Always unplug the tool before changing accessories. 2. Hold tool firmly when operating. 3. Do not accidentally turn tool on when setting down or picking up. 4. Keep hands away from collet and / or mounted accessories when tool is running or immediately afte...
Page 5 of 10 battery cartridge can explode in a fire. 8. Be careful not to drop or strike battery. 9. Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. 10. When using a cordless power tool continuously, the battery ma...
Page 6 of 10 warning: 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Use only the charger that is included with your rotary tool and battery. Do not substitute another charger. 3. Do not dissembl...
Page 7 of 10 1. The proper operating speed depends on the material and accessory used. It is recommended you test an accessory with the material before starting a project. 2. Guidelines - note the speed indicator reference marks on the speed control dial. A. Delicate woodwork, polishing, buffing, ma...
Page 8 of 10 disconnect electrical plug or spark plug lead from the power source. Accidental start up could cause serious personal injury. Assembly of chain saw sharpening attachment because there are different sizes and types of chains used on different saws, your new sharpener must be assembled to...
Page 9 of 10 sharpening the chain 1. Set your saw on a flat, solid surface so it will not slip while you are sharpening the chain. The chain tension should be adjusted as specified in the chain saw owner’s manual. If it is too loose, the teeth will move, resulting in a poor sharpening job. Sharpenin...
Page 10 of 10 warning some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, ...
