Northern Industrial Tools 9.6V User Manual - page 4
Page 4 of 10
Always wear safety goggles
1. Always unplug the tool before changing accessories.
2. Hold tool firmly when operating.
3. Do not accidentally turn tool on when setting down or picking up.
4. Keep hands away from collet and / or mounted accessories when tool is running or immediately after
use.
5. Use clamps or other suitable holding devices to secure the workpiece to a stable platform.
6. Ensure that all accessories are run at their rated speeds.
7. Wear gloves and face shield when using wire or bristle brushes. Do not use wire or bristle brushes at
speeds greater than 15,000 RPM. Safety tip: always pre-run brushes for at least 1 minute to discard
loose bristles. Operate brush accessories away from you and other people.
8. Never start-up the tool when an accessory is in contact with the material.
9. Do not leave a running tool unattended. Turn it off before laying it down.
10. Do not attempt to change accessories while the tool is running. If an accessory jams, turn off the
tool and unplug it before attempting to fix it or replace it.
11. Do not use any accessory tool other than those included in this set or are specifically made for
rotary tools.
12. Before using cutting wheels, ensure the wheel is not damaged. If tool is dropped, inspect cutting
wheel immediately and replace if chipped.
13. Do not sand or grind near flammable material.
14. This tool is not a dental tool and is not designed to be used on teeth of any kind.
15. Never hold the tool near your face. Some accessories may separate in use.
16. To prevent overheating, do not cover the side air vents with your hand.
17. When engaged with material, do not apply pressure and push the tool. Allow the selected speed
and accessory to do the work.
18. Do not attempt to repair or modify the rotary tool. If a malfunction occurs within the warranty period,
follow the instructions in the Warranty Policy.
BATTERY CARE AND USE
WARNING: Important safety instructions for battery cartridge.
1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger,
(2) battery, and (3) product using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter, stop operating immediately and re-charge the
battery.
4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. When battery pack is not in use, keep it away from other metal objects such as paper clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one terminal to
another. Shorting of the battery terminals can cause sparks, burns, or fire.
6. Do not expose battery cartridge to water or rain.
7. Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The