Northern Lights OM150C12 Operator's Manual - page 9
OM150C12 11/11
7
Safety Rules (Continued)
Use Proper Lifting Equipment
and Techniques
Lifting heavy components
incorrectly can cause severe injury
or damage to machinery. Avoid
unbalanced loads. Do not use
lifting eyes. Lift the generator set
using lifting bars inserted through the lifting holes
on the skid. Follow all recommended removal and
installation procedures in this and associated Northern
Lights manuals.
Use Proper Tools
Makeshift tools
and procedures
can create safety
hazards. Always use
appropriate tools for
the job.
Use power tools only to loosen threaded parts and
fasteners. For loosening and tightening hardware,
always use the correct sized tools. Do not use US
measurement tools on metric fasteners, or vice versa.
Use only service parts that meet Northern Lights
specifications.
Dispose of Waste Properly
Disposing of waste improperly can threaten the
environment and lead to unsafe working conditions.
Potentially harmful waste used in Northern Lights
equipment can include oil, fuel, coolant, filters and
batteries.
Use leakproof containers to drain fluid. Do not
use food or beverage containers that may mislead
someone into drinking from them.
Do not pour waste onto the ground, down a drain or
into any water source.
Avoid Hot Exhaust
Avoid exposure to and physical contact with hot
exhaust gases. Exhaust parts and streams can reach
high temperatures during operation, leading to burns
or other serious injury.
Cleaning exhaust filters can
also lead to exposure to hot
exhaust gas and the injury
risk associated with it. Avoid
exposure to and physical
contact with hot exhaust gases
when cleaning exhaust filters.
During auto or manual/stationary exhaust filter
cleaning operations, the engine will run at
elevated temperatures for an extended period of
time. Exhaust parts and streams can reach high
temperatures during operation, leading to burns or
other serious injury.
Avoid Harmful Asbestos Dust
Inhaling asbestos fibers may cause lung cancer.
Avoid breathing any dust that may be generated
when handling
components containing
asbestos fibers, including
some gaskets.
The asbestos used in
these components is
usually found in a resin
or otherwise sealed.
Normal handling of these
components is not dangerous, as long as airborne
dust containing asbestos is not generated.
Avoid creating dust. Never use compressed air for
cleaning. Avoid brushing or grinding materials
containing asbestos. When servicing, wear an
approved respirator. A special vacuum cleaner is
recommended to clean asbestos. If this vacuum is
not available, apply a mist of oil or water on the
material containing asbestos. Keep all bystanders
away from any area where asbestos dust may be
generated.