Northwestern Bell EasyTouch 58100 User Manual

Summary of EasyTouch 58100

  • Page 1

    Important service information read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed ac...

  • Page 2

    Save these instructions important safety instructions when using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings an...

  • Page 3

    1. Use a damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil. Never use polish, solvents, abrasives or strong detergents since these can damage the finish. 2. Your phone should be situated away from heat sources such as radiators, heaters, stoves or any other appli...

  • Page 4

    Easytouch 58100 controls diagram handset (front view) base unit (bottom view) telephone controls: handset retainer tab - if you decide to have the unit placed in the wall mount position, the handset retainer clip can be pulled out and turned around so that it allows the handset to hang onto the base...

  • Page 5

    Ringer on/off switch - used to turn the ringer on or off. Tone/pulse switch - allows you to switch the dialing mode to either pulse or touch tone dialing. Wall mount bracket - allows you to mount the phone on the wall. Use if desk or table space is limited. See figure 1. Installation desktop connect...

  • Page 6

    Telephone operation pulse/tone dialing • if your home is equipped with touch-tone dialing service, set the pulse / tone switch to tone position. • if you have a pulse(rotary) dialing service, set the pulse/tone switch to pulse position. Placing a call lift the handset and listen for a dial tone. Dia...

  • Page 7

    Troubleshooting telephone unit troubleshooting table symptom solution no dial tone • the handset cord or telephone line cord may be loose at the connections. Push in firmly at both ends to establish good contacts. • test the phone at a different telephone wall jack and listen for a dial tone. • test...

  • Page 8

    58100x/08249a-2 www.Nwbphones.Com.