Docking scanner user guide work with the "made for ipad" logo means that an electronic accessory has been designed to connect specifi cally to ipad and has been certifi ed by the developer to meet apple performance standards. Apple is not responsible for the operation of this device or its complianc...
2 important safety instructions • keep away from water or moisture and dusty areas. • never store in hot and very cold areas. • ambient temperature ranges from 0°c to +35°c (32°f~+95°f). • only use attachments/accessories specifi ed by the manufacturer. • avoid dust contamination when the scanner is...
3 table of contents important safety instructions ............................................................................................................... 2 table of contents .........................................................................................................................
4 quick getting started 1. Attach usb cable ipad supplied usb power adapter 2. Turn on power 3. Dock ipad 4. Install i-scan app from app store 5. Insert photo and scan 6. Preview and save.
5 unpack the following items should include in your packaging: scanner usb cable calibration sheet roller cleaner 5"x7" quick start guide lens cleaner photo protective sleeve quick start guide.
6 overview ipad dock connector feed slot exit slot stand mini usb port (for power input only) paper guide power button front rear paper guide power led.
7 power source • the scanner incorporates a mini usb port which is designed for power input only. • the scanner requires 10.5 watts (5v 2.1a) of power via ipad usb power adapter that came with your ipad packaging. 1. Connect the small end of the usb cable to the mini usb port of the scanner. 2. Conn...
8 connect to ipad • turn on your ipad and connect it carefully to the ipad dock connector of the scanner. Make sure it sits fi rmly in place. Power on / off • press the power button to turn on the scanner. To turn off, long press for a few seconds then release the button. Description power led statu...
9 power on the ipad, the message on the right will prompt on the ipad screen guiding you to the app store for i-scan app download. Follow the on-screen instructions to complete the installation. Upon completion, the i-scan app icon will then appear on the ipad home screen. • make sure that your ipad...
10 scan press “scan” button to scan scan scan 1. Insert a photo/document facing up into the feed slot until it is gripped by the roller. 2. Adjust the paper guide against the edges of the photo/document. 3. Tap the button. The scan starts with the real-time preview on the ipad's screen. 4. When the ...
11 the scanner includes the ability to auto launch the i-scan app when your ipad is docked and turned on. If your ipad is running on ios 5, the message on the right will pop up asking if you want to launch the app, tap allow. App launch message on ipad ios 5.
12 tips & hints no power. • the usb cable is not plugged into the mini usb port on the unit and/or usb power adapter properly. • make sure you have turned on the power button on the unit. Ipad scanner does not response when ipad is docked. • make sure you have installed i-scan app and docked ipad to...
13 ipad scanner is slow or hung up. • when the power led is fl ashing and/or a busy icon (" " ) appears, do not press any buttons, nor unplug ipad and the power source. • if the scanner is not working properly (e.G. The busy icon " " remains for a long time), try forcing i-scan app to close, reconne...
14 specifi cations scanner type color cis sheet-fed scanner light source led (r, g, b) scan size up to legal (8.5" l x 14" w) size scan mode color scan resolution: 300 dpi scan speed 6 ppm @ a4 color 300 dpi ports usb mini-b ; ipad 30-pin connector power source input: 100-240v~ 0.45a (0,45a) 50-60 h...
15 appendix 1: calibrate • to get the best scan quality, please perform the steps below from time to time. • remove the fi lm on the calibration sheet before use. • make sure the calibration sheet is clean and free of dust before use. 1. Tap the screen. 2. Choose settings > calibrate. 3. Insert the ...
16 appendix 2: use the photo protective sleeve • some old photos or documents might become fragile. To protect them from possible damage during scanning, use a photo protective sleeve to help. • remove the fi lm on the photo protective sleeve before use. • place the photo inside the protective sleev...
17 appendix 3: clean • to get the best scan quality, please perform the steps below from time to time. • make sure the roller cleaner and lens cleaner are clean and free of dust before use. Use a roller cleaner 1. Tap the screen. 2. Choose settings > clean. 3. Hold the grip handle of the roller clea...
18 off use a lens cleaner 1. Power off the scanner. 2. Hold the grip handle of the lens cleaner with the sponge side facing down. 3. Insert fi rmly the lens cleaner with the fabric side facing up into the exit slot. 4. Pull the lens cleaner all the way to the end of the exit slot. 5. Move the lens c...
19 appendix 4: charging your ipad • the docked ipad starts charging when the ipad scanner is turned-off and the power is supplied to the mini usb port constantly. Power led indicator scanner status usb power adapter on steady blue ready for use pluged off no light ipad charging pluged off the usb po...