NOTHERN TVIBIR65 Installation & Setup Manual - page 2
d screws.
3 Menu Operation
Menu
SCENE
LENS
RESET
EXPOSURE
WB
DAY&NIGHT
BACKLIGHT
NR
SPECIAL
ADJUST
INDOOR
OUTDOOR
INDOOR1
LOW-
LIGHT
MANUAL
SHUTTER
AGC
SENS-UP
BRIGHTNESS
D-WDR
DEFOG
BLC
HSBLC
ATW
AWC-SET
INDOOR
OUTDOOR
MANUAL
COLOR
B/W
EXT
2D NR
3D NR
CAM
TITLE
D-EFFECT
MOTION
PRIVACY
LAUGUAGE
DEFECT
VERSION
SHARPNESS
MONITOR
LSC
VIDEO.
OUT
EXIT
SETUP
3.1 VIDEO.OUT
PAL or NTSC is selectable .
3.2 LANGUAGE
English, Japanese, CHN1, CHN2, Korean, German,
French, Italian, Spanish, Polish, etc., are selectable.
3.3SETUP
3.3.1 SCENE
You can select indoor, outdoor, indoor 1 and low
-light as the working environments.
3.3.2 LENS
The camera is equipped with a fixed lens.
3.3.3 EXPOSURE
EXPOSURE
1. SHUTTER
AUTO
2. AGC
OFF
3. SENS-UP
---
4. BRIGHTNESS
---|------ 40
5. DEFOG
OFF
6. BACKLIGHT
OFF
7. RETURN
RET
Figure 3-2 Exposure
SHUTTER: AUTO,1/25, 1/50, FLK, 1/200, 1/400,
1/1k, 1/2k, 1/5k, 1/10k, 1/50k, x2, x4, x6, x8, x10,
and x15 are selectable.
: You can set the AGC value from 0 to 15.
AGC
: You can set the SENS-UP to OFF or AUTO.
SENS-UP
: You can set the brightness value
BRIGHTNESS
from 1 to 100.
: You can set the D-WDR to ON to improve
D-WDR
the image quality or OFF to disable the function.
: You can set the defog function as ON to
DEFOG
enable the function. Position, size, and the defog
gradation are configurable.
3.3.4 Backlight
Backlight Compensation (BLC):
Set the gain of BLC as High, Middle, or Low.
-GAIN:
Press the up/down/left/right button to
-AREA:
define the BLC position and size. Select RET or
AGAIN to go back the BLC menu or re-define the
BLC area.
Restore the BLC settings to the default.
-Default:
HSBLC: Select an HSBLC area. Set the DISPLAY
status as ON. Press the up/down/left/right button
to define the area position and size. Set the HSBLC
LEVEL from 0 to 100. Select ALL DAY or Night for the
HSBLC mode. Set the BLACK MASK status as ON or
OFF.
HSBLC
1. SELECT
AREA 1
2. DISPLAY
ON
3. LEVEL
---|------ 40
4. MODE
ALL DAY
5. BLACK MASK
ON
6. DEFAULT
7. RETURN
RET
Figure 3-3 HSBLC
3.3.5 White Balance (WB)
INDOOR, OUTDOOR, MANUAL, ATW (Auto-tracking
White Balance), AWC→SET are selectable.
3.3.6 Day & Night
Color, B/W, and EXT are selectable for DAY and
NIGHT switches.
3.3.7 NR
: You can set 2D NR status as ON or OFF.
2D NR
: Set the Smart NR status as ON and adjust
3D NR
the 3D smart NR sensitivity ranges from 0 to 100.
Set the 3D NR LEVEL ranges from 0 to 100. Set the
2D&3D NR
1. 2DNR
OFF
2. 3DNR
ON
3. RETURN RET
3D NR
1. SMART NR ON
2. LEVEL
------|--8 0
3. START. AGC -|--------10
4. END. AGC
-|--------10
5. RETURN
RET
Figure 3-5 NR
Figure 3-6 3D NR
3.3.8 SPECIAL
Edit the camera title on this section.
Camera Title:
D-effect:
Set the freeze function as ON or OFF.
-FREEZE:
OFF, MIRROR, V-FLIP, and ROTATE are
-MIRROR:
selectable for mirror.
Define the zoom area by configuring
-D-ZOOM:
the position from PAN & TILT.
The D-Zoom area, sensitivity
-SMART D-ZOOM:
and time are configurable.
Set the NEG IMAGE as ON or OFF.
-NEG.IMAGE:
SPECIAL
1. CAM TITLE
ON
2. D-DFFECT
3. MOTION
OFF
4. PRIVACY
OFF
5. LANGUAGE
ENG
6. DEFECT
7. VERSION
130722
8. RETURN
RET
Figure 3-7 Special
MOTION
1. SELECT
AREA 1
2. DISPLAY
ON
3. SENSITIVITY
----|---- 30
4. MOTION VIEW ON
5. DEFAULT
6. RETURN
RET
Figure 3-8 Motion Detection
Motion: Select a MOTION area. Set the DISPLAY
status as ON or OFF. Press the up/down/left/right
button to define the position and size of the area.
Set the SENSITIVITY from 0 to 60. Set the MOTION
VIEW status as ON or OFF.
Privacy: Select a PRIVACY area. Set the DISPLAY
status as INV, MOSAIC, COLOR or OFF. Press the
up/down/left/right button to define the position
and size of the area.
Defect: LIVE DPC, STATIC DPC and Black DPC are
adjustable in this section.
: You can check the software version of the
Version
device.
PRIVACY
1. SELECT
AREA 1
2. DISPLAY
MOSAIC
3. COLOR
10
4. TRANS.
1
5. DEFAULT
6. RETURN
RET
ADJUST
1. SHARPNESS
--------|15
2. MONITOR
LCD
3. LSC
OFF
4. VIDEO. OUT
PAL
5. RETURN
RET
3.3.9 ADJUST
: Adjust the sharpness from 0 to 15.
Sharpness
: Monitor CRT, and Monitor LCD are
Monitor
selectable.
: Set the LSC status as ON or OFF.
LSC
3.3.10 RESET
Reset all the settings to the default.
3.3.11 EXIT
Press OK to exit the menu.
START. AGC level as the threshold to enable AGC,
and set the END. AGC level as the threshold to
disable AGC.
Figure 3-9 Privacy Mask
Figure 3-10 Adjust
Figure 3-1 Main Menu
You can call the menu and adjust the camera
parameters with a coaxial camera controller
(purchase separately). You can also call the menu
with supported TVI DVR.