Nova N208 Installation Manual - Trouble Shooting Guide
17
Trouble Shooting Guide
Problems
Explanations
Solutions
1
Power indicator
light not on
Power cord is not plug-in.
1. Check for power to the outlet
2. Check connection between
power cord and main control
unit.
The fuse is burnt out.
Check or replace the fuse.
2
Function indicator
light not on
The corresponding indicator light is
broken or burned out
Repair or replace the control
panel.
The wiring or some electronic
component in the circuit has failed.
Repair or replace what has failed
in that circuit.
3
Infrared heater will
not heat up.
The heater is broken
Replace with a new heater of the
same specifications.
Its life will be shortened gradually
from excessive use.
The fuse is burned out.
Check or replace the fuse.
The wiring connection for the
heater is loosed or in the wrong
location.
Check it, and reconnect tightly.
The circuit board is not
functioning.
Check the output on the circuit
board.
4
Sauna
room
not
maintaining correct
temperature
Problem with heater
See item #3
Incorrect setting on control panel
Reset it.
The temperature sensor wire maybe
loosed or broken.
Check sensor wire connection and
condition;
Check if the sensor head is visible
inside the sauna room.
5
Burning Smell
Circuit
problems
(broken
component short circuit, failure of
controlling system) causing the
burning of some component in the
electrical system.
1.Unplug sauna, check the
voltage;
2.Find the object of problem;
3. Replace the plug.
6
The light not
working
The light is burning out.
Replace the light
The socket is broken
Replace it.
The light wire is loosed or broken
1.Reconnect the wires or driver
2. If broken, replace it.
Problems with the control panel
Check or replace the control
panel.
7
No sound or poor
sound of speakers
The speaker is damaged - broken
Check if it need a replacement
The wire connection is open
Check the plug if it is tightly
plugged
The control panel is not functioning Check if it need a replacement
Please contact the distributor with questions regarding customer service and troubleshooting.