Nova Physics Group memory User Manual - page 20
• Click ‘Next’. A calendar will appear with a variety of dates from which you may
choose. Choose a date.
ONLY dates in BOLD are valid reset points. If you cannot recall when the problem
occurred, use the oldest date, or the factory tested date.
• Click ‘Next’. A confirmation page will open with advisories on it.
IMPORTANT NOTE: Please read and proceed by clicking ‘Next’ once more, if you are
certain you desire such a change, or other methods have failed to address the problem.
Once resetting is in operation, do not touch any controls.
• The Memory Player will display a progress bar and restart itself. In two or three
minutes, it will display a confirmation page.
This page also gives you the option to ‘Undo the Last Reset Point’ in case the problem
was not fixed by the first date chosen.
All resets can be reversed, so don’t worry if you’ve used the wrong date. Try again as
many times as you wish, until you’ve fixed the issue.
If you’re trying to preserve a customization:
After using The Memory Player for some time, you’ll no doubt have customized many
settings, including the placement of graphics. It is advised that you create a reset point
that can be used to always return it to the point where your favorite settings were in
place. Creating reset points periodically (twice a year is recommended) can help prevent
losing your customization as the months and years pass. To preserve a customization or
a particular point in time:
• Select ‘Create a Reset Point’.
• Click ‘Next’. A blank field in which you may name your reset point will
appear, called ‘Reset Point Description’.
• Type in as much information as you can to describe why you’re creating this
reset point.
• Click ‘Create’. The confirmation should appear in under one minute.
18