Novac NV-ST3810XU User Manual - Software Installation
CABLES CONNECTION
1. Inse
Connector of drive.
using an AC adapter to powers
l
pan
AC ad
3. Ple
i
ll the driver.
rt the USB cable into the Interface
2. If you are
this external drive, connect the AC adapter
ead to the Power Jack (DC IN) at the rear
el of the drive, and then attach the
apter to the AC power outlet.
ase follow the related software
nstallation to insta
Software Installation
Under Win95 and Win98, the USB device is not stable to work, we recommend using this
drive under Windows 98SE (
indows operating
systems.
Second Edition) and the newer version of W
WINDOWS XP/2000/Me
1. Boot-up your computer into Windows, making sure the USB port device driver has been inst
vailable. To check this, open the “Device Manager” window to see if the “USB Host
alled
e AC adapter connections (if using AC adapter) are
. Insert the USB interface cable into computer.
esident device driver automatically. After the installation, this external
sn’t work properly, please go into
“Device Manager” to check whether the devices are installed as the following:
and is a
Controller” is installed without error.
2. Ensure the USB interface cable and then th
made as described in Hardware Installation
3. Windows will install its r
drive will appear under a new drive letter in “My Computer”.
4. If the external drive doesn’t appear in “My Computer” or doe