DL manuals
Novar
Computer Hardware
Lingo SE
Installation Instruction

Novar Lingo SE Installation Instruction

Page of 8

Download

Print this page

Bookmark us

Lingo

SE Baseplate Installation Instructions

Description

The Lingo

SE Energy Infosystem is the next generation control processor that

functions as a system network manager and control monitor in Novar’s Logic

One

Advanced Building Control System.

Lingo SE monitors and logs the operations of the local

control modules, manages network communications,

and provides expandable and integrated control of the

building’s equipment. Lingo SE’s processing power,

compatibility, and multiple network capabilities

provide optimum control to cut energy costs, increase

comfort, and reduce equipment maintenance.

This document provides instructions for mounting and

wiring the Lingo SE baseplate and checking the

installation.

Lingo SE Specifications

Agency Approvals

Listed device:

CUL/UL E90949

Standards used:

UL 916, Energy Management Equipment

CSA C22.2, No. 205-M1983, Signal Equipment

Power Requirements

Voltage:

24 VAC, Class 2

Consumption:

40 VA

Input/Output Ratings

Analog Inputs:

4 to 20 mA

Digital Inputs:

Contact closure only

Output (Fault):

24 VAC or VDC, 1 amp, Class 2

Operating Environment

Lingo SE with Touchscreen:

Operating temperature: 41° to 122°F (5° to 50°C)

0–80% RH, noncondensing

Storage:

–4° to 158°F (–20° to 70°C)

0–90% RH, noncondensing

DOC. #569066200—C 8/17/06

1 2 3 4 5 6 7 Next › »

Summary of Lingo SE

Page 1
Lingo ® se baseplate installation instructions description the lingo ® se energy infosystem is the next generation control processor that functions as a system network manager and control monitor in novar’s logic one ® advanced building control system. Lingo se monitors and logs the operations of th...
Page 2
Lingo se without touchscreen operating temperature: 32° to 140°f (0° to 60°c) 0–80% rh, noncondensing storage: –40° to 158°f (–40° to 70°c) 0–90% rh, noncondensing physical dimensions (baseplate only) height: 19.25 inches width: 13.25 inches depth: 2.5 inches weight: 8 lb (all aluminum enclosure) pr...
Page 3
Step procedure 1 remove the baseplate’s cover. § use the hex wrench included with the baseplate to loosen the two screws at the bottom of the baseplate. § lift off the cover. 2 position the baseplate against the wall. 3 mark the wall to show the locations of the four slotted mounting holes in the co...
Page 4
Supplying the lingo se with power the lingo se is powered by a 24-vac, 40 va, class 2 transformer (not included—the transformer kit must be purchased separately). The transformer must be installed not more than 50 feet from the lingo se using minimum 18-gauge wire or mounted directly to the lingo se...
Page 5
Note! The lingo se requires continuous power for proper operation. Make sure the lingo se power cannot be switched off accidentally. Note! The lingo se requires a dedicated transformer for the electronics. A separate transformer must be provided for its control outputs. Wiring the lingo se inputs an...
Page 6
Outdoor humidity sensor step procedure 1 connect the white (+) wire from the sensor to lingo se’s terminal 23 (+) at the humidity sensor input connections. 2 connect the black (–) wire from the sensor to lingo se’s terminal 22 (–) at the humidity sensor input connections. Demand pulse input step pro...
Page 7
Use two-conductor, shielded cable (novar wir-1010, belden 8761, or equivalent) and the following procedure to make the module communications connections. Step procedure 1 connect the black wire from the cable to the negative (–) terminal. 2 connect the shield wire to the shield terminal. 3 connect t...
Page 8
Model and part numbers the part numbers shown in table 1 should be used to order the necessary novar parts. Table 1. Novar part numbers product model no. Part no. Lingo se baseplate lingo/2-bpl 750110000 lingo se electronics assembly (no options) options: lingo se with integral touchscreen lingo se ...