O-Synce NAVI2move User Manual - page 12
11
4 RECORDING & TOUR DATA
4.1 Start recording
For saving or displaying data like time, distance or average speed you necessarily have to start a
recording.
To start a recording enter the navigation mode and hold the right button for 2 seconds (remote
switch: lower button). You will see the following pop-up:
Start recording by choosing the play-symbol and confirming with the left button (remote control:
middle button). The play-symbol will now appear in the lower right corner of the display.
Please remind that recording is only possible if you have GPS reception.
4.2 Pause and restart recording
For pausing your recording during a tour act the same way as if you would start a recording. Choose
the pause-symbol instead of the play-symbol. By confirming the play-symbol
,
the recording can be
restarted without starting a new tour.
4.3 Stop recording
For quitting a recording, choose the stop-symbol. The recording will be stopped immediately. A
summary of your tour can be found in the data mode.
4.4 Display tour summary
Enter the data mode which allows you to see a summary of your last three recordings. You will also
find the following totals values:
a. Time
b. Total kilometres
c. Altitude difference, uphill
d. Altitude difference, downhill