O2 Xda Stealth User Manual - page 33
COM ports
For example, when you purchase a Bluetooth
GPS-supported navigation software; you can
register this device as an effective serial port by
following the instructions on the manual of that
product and the steps below:
Tap Start > Settings > Connections tab >
Bluetooth
> COM Ports tab. To register a new
serial port:
1. Tap New Incoming Por t to enter setup
screen.
2. Select a port to be set.
3. Select Finish
6.4 Wi-Fi
Wi-Fi is a type of wireless local area network
that communicates between two devices by high
frequency radio waves. Your O
2
Xda Stealth
supports Wireless LAN, which is IEEE 802.11b/g
compliant. It allows your device to connect to the
Internet with detected wireless network.
To activate Wi-Fi
1.Tap Start > Settings > Connections tab >
Wireless Manager
.
2. Tap Wi-Fi to activate wireless network.
3. Tap Done to exit.
To check your Wi-Fi status
Tap Start > Settings > Connections tab > WiFi
Utility
> Wi-Fi Status tab and you may see the
details of your phone’s wireless LAN connection,
including Status, ESSID, BSSID, BSS Mode,
Channel
, Data Rate, IP Address, and Signal
Strength
.
To configure Wi-Fi settings
Tap Start > Settings > Connections tab > WiFi
Utility
> Setting tab and scroll to set the desired
value/mode for the following setting items:
Adhoc Channel
, Preamble, Data Rate, Power
Save
, Power strength, and Auto Power off. Tab
Set
button to confirm your setting.
To update IP info
Tap Start > Settings > Connections tab > WiFi
Utility
> IP Info tab > Renew or Ping button to
update IP information or locate the IP address of
the other device.
To search IP address
Tap Start > Settings > Connections tab
> Wi-Fi Utility > Site Survey tab > Re-scan
button to search the ESSID, Channel, RSSI, and
BSSID of the Wireless LAN.
To change IP address
1. Tap Start > Settings > Connections tab >
Wi-Fi > Network Adapters
tab.
2. In My network card connects to drop-down
list, tap either The Internet or Work. If you
are connecting to your ISP at home, tap The
Internet. If you are connecting to a private
network such as a corporate network at work,
tap Work.
3. Tap the appropriate adapter in Tap an
adapter to modif y set t ings
box.The IP
address will now appear in IP Address box
on IP Address tab.
4. To change TCP/IP settings if your ISP or
private network does not use dynamically-
assigned IP addresses, tap Use specific IP
address
and enter the requested information.
Contact your ISP or network administrator to
get the IP address, Subnet mask, and/or
Default gateway
(if needed).
5. To change DNS and WINS settings if your ISP
or private network does not use dynamically-
assigned IP addresses, tap Name Servers
tab and enter the requested information.
Servers that require an assigned IP address
may also require a way to map computer
names to IP address. DNS and WINS are the
resolution options supported on your O
2
Xda
Stealth.
64
6
Ge
ttin
g Co
n
n
e
cte
d
Please note
: After activating Wi-Fi, a new
window, New Network Detected, will appear if
any is detected. Select Connect and enter your
password to the local network. Tap Connect to
connect this device with local network. You may
use Wi-Fi for up to 2 hours. The actual use time
will depend on the power status of your battery.
While this feature is not in use, please disable it
to save power.
6.5 USB card reader
You may use the device as a mass storage
device or a mini SD card reader.
1. Tap Start > Settings > Connections tab >
USB
2. On USB Connection Mode screen, tap
SD-Card Reader
, and then tap Change.
3. Connect the phone to the computer with USB
cable.
4. Your PC will automatically detect the new
hardware. Now you can view or transfer files
to and from your mini SD card.
6.6 Internet Sharing
By using utility, you can set your O
2
Xda Stealth
as a wireless modem. Internet Sharing allows
your PC/Notebook be connected to a wireless
network. Before creating a new modem via the
selected connection type, you still need to install
the drivers on your PC/Notebook. Please find
the drivers in the Getting Started Disc.
1. Tap Start > Programs > Internet Sharing.
2.Select a USB or Bluetooth PAN as PC
Connection
type.
3 .C o nne c t yo ur d ev i c e v i a U S B c ab l e o r
Bluetooth to a PC/Notebook, and then tap
Connect
.
Please note
: Before you tap Connect, please
make sure that your have installed a GPRS SIM
card, and that you have connected this phone to
your PC/Notebook by USB cable or Bluetooth
and disabled ActiveSync.
6.7 Terminal Services Client
Using Terminal Services Client, you can log
onto a PC running Terminal Services or Remote
Desktop and use all of the programs available on
that PC from your mobile device. For example,
instead of running Word Mobile, you can run the
PC version of Word and access all of the .doc
files on that PC from your device. Connecting
to a terminal server starts a remote connection
to the ser ver via a GPRS or Wireless L AN
connection:
1. Tap Start > Programs > Terminal Services
Client
.
2. To connect to a server you have previously
connected to, define a ser ver in Recent
servers
. To connect to a new server, enter
the server’s name in the Server box. Check
Limit size of server desktop to fit on this
screen
box only when using applications that
have been specifically sized for use with the
device.
3. Tap Connect.
Pl e a s e n o t e
: If the net work administrator
has configured Terminal Ser vices Client
to reconnect to disconnected sessions, and
you previously disconnected from a Terminal
Server without ending the session, the Terminal
Services Client will reconnect to that session.
65
6
Ge
ttin
g Co
n
n
e
cte
d