Oartec training monitor operation manual.
Operating instructions on/off press once to turn on or off. Monitor will automatically turn off after 90 seconds to save battery life. Setting the time turn the monitor on. Press the time button. Time digits will flash for setting the desired time. Program in the set time using the arrow buttons. Wh...
Operating instructions speed units of speed able to be displayed in the speed field (center right) are time/500m, m/s, km/hr, m/hr and power in watts. Press the speed button for the selection of the preferred unit of speed. To change the unit of speed while rowing, simply press the speed button. Sta...
Av (average data) the default display does not illuminate the av field when the monitor is turned on. To illuminate the av window press the av button and the av window will display the average speed for the currently selected speed unit. If wanting to display a different average speed unit, press th...
Operating instructions tech (technical data) technical functions that can be calculated and displayed in the tech field are drive ratio, average spm, stroke length, drag, and heart rate. Select the preferred tech function by pressing the tech button. If the hr receiver is plugged in, it will overrid...
Operating instructions memory when a set workout is completed the total distance or total time will be displayed on a frozen screen. During the workout, each split, set at a default of 500m intervals, is recorded for the duration of the workout. To access the data recorded for each split of a set wo...
Ports at the back of the monitor there are four ports for specific cable connection. The first small port is for the flywheel sensor cable (labelled sensor port) the second small port is for the polar heart rate receiver.(labeled hr port) the usb port is for connecting the monitor to a computer. The...
